Electrocoagulation (EC) is a process used by supply of electric current with sacrificial electrodes for the removal of pollutant from wastewater. The study was experimentally investigated taking into account various factors such as pH (3–7.5), current (0.03–0.09 A), distance between the electrodes (1–2 cm), electrolytic concentration (1–3 g/L), and electrolysis time (20–60 min) which is impact on the % removal efficiency of color, chemical oxygen demand (COD), turbidity and determination of energy consumption used for aluminum (Al) electrode used. The surface response design process based on the central composite design (CCD) has been used to optimize different operational parameters for treatment of hospital wastewater using EC process. The % color, COD and turbidity removal, and energy consumption under different conditions were predicted with the aid of a quadratic model, as were the significance and their interaction with independent variables assessed by analysis of variance (ANOVA). The optimal conditions were obtained through mathematical and statistical methods to reach maximum % color, COD, and turbidity removal with minimum energy consumption. The results showed that the maximum removal of color (92.30%), COD (95.28%), and turbidity (83.33%) were achieved at pH–7.5, current–0.09A, electrolytic concentration–3g/L, distance between electrodes–2 cm and reaction time 60 min. This means that, the process of EC can remove pollutants from various types of wastewaters and industrial effluent under the various operating parameters.

Wastewater generated from different sources affects the health of living organisms and the natural environment due to the availability of different pollutants. Electrocoagulation (EC) is a good technology implemented for wastewater treatment before discharging to an environment as effluents. The electrocoagulation process is an effective method to the remove the color, chemical oxygen demand (COD), turbidity, and consumption of less energy from wastewater by considering different operating parameters. In this study, the major operating parameters for the electrocoagulation process such as pH (3–7.50), electric current (0.03–0.09 A), electrolytic concentration (1–3 g/L), the distance between electrodes (1–2 cm), electrolysis time (20–60 min) and combination of electrodes (Fe–Fe and Al–Al) were studied. The maximum removal of color–94.40%, COD–97.02%, and turbidity–90.91% with required energy consumption –36kWhr/m³ was obtained at the electric current–0.09 A, electrolyte concentration–3 g/L, pH–7, electrode combination–Fe–Fe, and distance between electrodes–3 cm, respectively. The studied parameters were affected the removal % color, % COD, % turbidity, and also the consumption of energy depending on the desired setup of fixed values of the parameter. Consumption of energy and electrode dissolution is related to the cost of operating in electrocoagulation in addition to the cost of labor and the small amount of sludge produced for disposal.

Water pollution by organic contaminants is one of the most severe issues confronting the world today as a result of the rapid increase of industrialization, urbanization, human population growth, and advances in agricultural technologies. Several attempts have been made to address global water pollution issues by utilizing conventional wastewater treatment technologies. However, conventional wastewater treatment methods have several limitations such as low efficiency, high operation costs, generation of secondary waste, require additional chemicals as oxidants and extra energy. Therefore, Heterogeneous photocatalysis has gained a lot of attention in the degradation of persistent organic pollutants because it combines high efficiency, environmental friendliness, cheap cost, and safety. Subsequently, the designing of novel nanocomposite photocatalysts with strong visible light-harvesting ability, efficient charge separation and transportation, and superb stability is imminently desired for wastewater treatment. Recently, the notion of combining g-C ₃ N ₄ with TiO ₂ to design high photocatalytic performance heterojunction photoactive nanocomposites for organic pollutant degradation has received a lot of attention. Meanwhile, the construction of g-C ₃ N ₄ /TiO ₂ -based heterojunction nanocomposites may enhance the ability of harvesting visible light, boost charge separation and transfer efficiency, and robust photocatalytic activity. Firstly, this review concisely explained the main sources of water pollution, as well as potential treatment approaches and the fundamental mechanism of heterogeneous photocatalysis. Subsequently, the details of properties, synthesis techniques, photoactivity modification strategies, and photocatalytic applications of g-C ₃ N ₄ , TiO _2, and g-C ₃ N ₄ /TiO ₂ heterojunction photocatalysts are presented. Following that, the recent advances aimed at improving the photocatalytic performance of various types of visible-light-driven g-C ₃ N ₄ /TiO ₂ heterojunction photocatalysts for organic pollutant degradation in wastewater are presented in detail. Finally, some concluding remarks and perspectives on the challenges and opportunities for constructing different types of g-C ₃ N ₄ /TiO ₂ -based heterostructured photocatalysts are presented.