The high energy consumption in Iran, particularly in the transportation sector, has contaminated large cities and jeopardized the society health. Therefore, in this study technical and economic features of the production of biodiesel plant in Iran from various wastes are investigated. Based on the Analytic Hierarchy Process (AHP) method’s findings, the southern area of Iran is selected for establishing the biodiesel plant in Iran. The biorefinery, which includes three units of sewage sludge, edible waste oil and microalgae. The results of the economic evaluation show that the lowest costs of investment and production of biodiesel are related to microalgae units ($0.375/kg) and edible waste oil ($0.53/kg), respectively. Also, among all units, the lowest break even prices are related to biodiesel production ($1.17/kg) and the highest ATROR rate (29.16%) belongs to the microalgae unit. This indicates that this unit is more profitable than other units and the invested cost is returned to the investor in a shorter period of time (3.43 years). On the other hand, the results of sensitivity analysis show that the highest sensitivity of changes in the selling price of biodiesel and the cost of raw materials to ATROR to the microalgae and sludge unit. Therefore, the construction of a biorefinery in Iran has an economic justification.

Achieving a compound thin film with uniform thickness and high purity has always been a challenge in the applications concerning micro electro mechanical systems (MEMS). Controlling the adhesion force in micro/nanoscale is also critical. In the present study, a novel method for making a sputtering compound target is proposed for coating Ag–Au thin films with thicknesses of 120 and 500 nm on silicon substrates. The surface topography and adhesion forces of the samples were obtained using atomic force microscope (AFM). Rabinovich and Rumpf models were utilized to measure the adhesion force and compare the results with the obtained experimental values. It was found that the layer with a thickness of 500 nm has a lower adhesion force than the one with 120 nm thickness. The results further indicated that due to surface asperity radius, the adhesion achieved from the Rabinovich model was closer to the experimental values. This novel method for making a compound sputtering target has led to a lower adhesion force which can be useful for coating microgripper surfaces.

Adhesion is a critical factor in microelectromechanical systems (MEMSs) and is influenced by many parameters. In important fields, such as microassembly, an improved understanding of adhesion can result in higher precision. This study examines the influence of deposition of gold and titanium onto the atomic force microscope (AFM) tips in adhesion forces and Young’s modulus, between a few MEMS substrates (silicon, gold, and silver) and the AFM tips. It was found that, except for gold substrate, an AFM tip coated with gold has the highest adhesion force of 42.67 nN for silicon substrates, whereas the titanium-coated AFM tip decreases the force for all the samples. This study suggests that such changes must be taken into account while studying the adhesion force. The final results indicate that utilizing gold substrate with titanium AFM tip led to the lowest adhesion force, which could be useful in adhesion force measurement during microassembly.