Purpose: Recently, a self-nanoemulsifying drug delivery system (SNEDDS) has showngreat improvement in the enhancement of drug bioavailability. The selection of appropriatecompositions in the SNEDDS formulation is the fundamental step towards developing asuccessful formulation. This study sought to evaluate the effectiveness of fractional factorialdesign (FFD) in the selection and screening of a SNEDDS composition. Furthermore, the mostefficient FFD approach would be applied to the selection of SNEDDS components.Methods: The types of oil, surfactant, co-surfactant, and their concentrations were selected asfactors. 26 full factorial design (FD) (64 runs), 26-1 FFD (32 runs), 26-2 FFD (16 runs), and 26-3 FFD(8 runs) were compared to the main effect contributions of each design. Ca-pitavastatin (Ca-PVT)was used as a drug model. Screening parameters, such as transmittance, emulsification time,and drug load, were selected as responses followed by particle size along with zeta potentialfor optimized formulation.Results: The results indicated that the patterns of 26 full FD and 26-1 for both main effects andinteractions were similar. 26-3 FFD lacked adequate precision when used for screening owing tothe limitation of design points. In addition, capryol, Tween 80, and transcutol P were selected tobe developed in a SNEDDS formulation with a particle size of 69.7 ± 5.3 nm along with a zetapotential of 33.4 ± 2.1 mV.Conclusion: Herein, 26-2 FFD was chosen as the most efficient and adequate design for theselection and screening of SNEDDS composition. The optimized formulation fulfilled therequirement of a quality target profile of a nanoemulsion.
Purpose: To assess the effect of the lactic acid (LA)-to-glycolic acid (GA) molar ratio and polyethylene glycol (PEG) concentration on the formation of poly-lactide co-glycolide acid (PLGA)-PEG-PLGA co-block polymers simultaneously using statistical approach. Methods: A 22 full factorial design with the addition of a point in the center of the design, namely curvature, was applied. Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and nuclear magnetic resonance (NMR) were performed to confirm the formation of the co-block polymer. Simvastatin (SMV), a drug model was incorporated into the nano-polymeric micellar (NpM) of PLGA-PEG-PLGA followed by solubility phase, particle size, zeta potential, and entrapment efficiency characterizations. Results: FTIR, DSC, and NMR successfully confirmed the formation of co-block polymers. Solubility of SMV increased from 2 to 44-folds depending on co-block concentration with entrapment efficiency of 59%-80%. The NpM had size in the range of 206 to 402 nm with negative zeta potential. LA to GA ratio had greater effect on particle size reduction and increasing of co-polymer length. In addition, it had higher contributions on increasing of solubility and entrapment efficiency of SMV than PEG. Conclusion: According to these findings, the LA to GA ratio and PEG concentration gained a great consideration in order to prepare the PLGA-PEG-PLGA co-block which fulfilled the quality target product profile of NpM delivery system.
2 January 2020 in Drug Development and Industrial Pharmacy
The aim of this research was to assess the effect of polymer blend and effervescent components on the floating and swelling behaviors of swellable gastro-floating formulation as well as the drug release through a compartmental modeling analysis. Swellable gastro-floating formulation of freely water-soluble drug, metformin HCl as a drug model, was formulated and developed using D-optimal design. Polymer combination between interpolymer complex (IPC) (poly-vinyl acetate-copolymer methacrylate) and hydroxy propyl methyl cellulose (HPMC), and effervescent components were studied and optimized in this work. Several factors affecting the drug release behavior were determined e.g. swelling behavior, erosion behavior, and floating behavior were studied as well as the drug release through compartmental modeling analysis. The results revealed that the hydrophilic polymer was responsible for gas entrapment formed from effervescent reaction, meanwhile IPC contributed on maintaining the swollen matrix integrity through intermolecular polymer interaction. In addition, effervescent components played fundamental role in the formation of porous system as well as inducing burst release effect. Compartmental modeling provided different outlook about the drug release. Presence of IPC at a high proportion (10–15%) of the polymer blend modulated the changes of pattern of the drug release kinetics and mechanism. Finally, compartmental modeling-based approach was more adequate to describe the drug release kinetics and mechanism compared to the monophasic equation model correlating with process understanding of the drug release from swellable gastro-floating formulation.
8 December 2016 in Pharmaceutical Development and Technology
The purpose of this research was to develop an inclusion complex of meloxicam (MEL)/β-cyclodextrin (β-CD) incorporated into an orally disintegrating tablet (ODT), using statistical analysis to optimize the ODT formulation based on a quality by design (QbD) approach. MEL/β-CD complexation was performed by kneading, co-precipitation and spray drying methods under different molar ratios. Fourier transform infrared spectroscopy, X-ray diffraction and thermal analysis were utilized to evaluate the complexes. A central composite design (α = 2) was applied to optimize and assess the influence of Primojel, Primellose and crushing strength (CS) as independent variables on tablet friability, disintegration behavior, wicking properties and drug release. The spray drying method induced formation of an amorphous complex and enhanced solubility and drug release of MEL. Furthermore, a QbD-based statistical analysis was successfully utilized to optimize the ODT formulation. Primojel, Primellose and CS showed unique main effects and interactions at different levels. CS was the dominant factor, affecting friability, disintegration behavior and drug release, while wicking properties were affected by Primojel and its interaction with Primellose. Therefore, according to the overlay plot, CS was dominant factor in determining the optimum region based on a QbD approach.
10 July 2024 in International Journal of Pharmaceutics
Selection of super-saturable self-nano emulsion (S-SNE) component and further development to obtain the design space which met the requirements is very challenging. The purpose of this study was to develop pitavastatin S-SNE formulation through prior screening and selection followed by a simultaneous determination of the design space using an experimental design approach. The fractional factorial design 26-2 was successfully applied to screen appropriate compositions in S-SNE, namely oil, surfactant, and co-surfactant. Not only the types of S-SNE composition but also the range of concentration of each composition was achieved. The selected type and range of S-SNE composition was further developed using D-Optimal design to obtain the design space region, which had narrow and desirable features of S-SNE. Capryol 90, Tween 80, and Transcutol P were selected as S-SNE components. The simultaneous development of S-SNE formulation using an experimental design approach was successfully applied to formulate robust and controlled S-SNE characteristics. Graphical Abstract