Solar energy is one of the clean and healthy energies. Due to the high cost of required equipment to convert solar energy into the desired form, the economic facets must be addressed and the equipment should be installed in areas with higher accessible solar energy. However, due to the complex and time-consuming process of calculating solar radiation, it seems necessary to develop more simple models with higher estimation capability. Therefore, the present study investigated the prediction of solar radiation on the horizon using neural network methods, ANFIS and RSM, in Sarpol-e-Zahab Township, Kermanshah, Iran. In this respect, the meteorological data of this township were collected. Then, the key parameters were selected by performing sensitivity analysis, and models were designed and optimized using ANFIS, ANN, and RSM methods. Moreover, respective correlation coefficients and mean square errors of each method were obtained (ANFIS (0.993 and 0.0005), ANN (0.996 and 0.00029), and RSM (0.996 and 0.00027), respectively). Also, the neural network and response surface methodology were superior to the ANFIS Model in terms of performance, simplicity, and speed. In short, the performance of the response surface methodology was slightly better than that of the neural network.
12 January 2019 in Journal of Low Frequency Noise, Vibration and Active Control
In the present study, the noise pollution from different compositions of biodiesel, bioethanol, and diesel fuels in MF285 Tractor was studied in the second and third gears from two positions: driver and bystander, at 1000 and 1600 r/min, and running on 10 different fuel levels. For data analysis, the ANFIS network, neural network, and response surface methodology were applied. Comparing the means of noise pollution at different levels demonstrated that the B25E6D69 fuel, made up of 25% biodiesel and 6% bioethanol, had the lowest noise pollution. The lowest noise pollution was at 1000 r/min. Although the noise pollution emitted in the third gear was a little more than that emitted in the second gear. All the resultant models, laid by response surface methodology, neural network, and ANFIS had excellent results. Considering the statistical criteria, the best models with high correlation coefficients and low mean square errors were ANFIS, response surface methodology, and artificial neural network models, respectively.
14 July 2020 in Journal of Food Measurement and Characterization