The hot deformation characteristics of a GH4169 superalloy are investigated at the temperature and strain rate ranges of 1193–1313 K and 0.01–1 s−1, respectively, through Gleeble-3500 simulator. The hot deformed microstructures are analyzed by optical microscopy (OM), transmission electron microscopy (TEM), and electron backscattered diffraction (EBSD) technology. The effects of deformation parameters on the features of flow curves and annealing twins are discussed in detail. It is found that the shapes of flow curves are greatly affected by the deformation temperature. Broad peaks appear at low deformation temperatures or high strain rates. In addition, the evolution of annealing twins is significantly sensitive to the deformation degree, temperature, and strain rate. The fraction of annealing twins first decreases and then rises with the added deformation degree. This is because the initial annealing twin characters disappear at the relatively small strains, while the annealing twins rapidly generate with the growth of dynamic recrystallized grains during the subsequent hot deformation. The fraction of annealing twins is relatively high when the deformation temperature is high or the strain rate is low. In addition, the important role of annealing twins on dynamic recrystallization (DRX) behaviors are elucidated. The obvious bulging at initial twin boundaries, and the coherency of annealing twin boundaries with dynamic recrystallized grain boundaries, indicates that annealing twins can motivate the DRX nucleation during the hot deformation.
11 October 2023 in Journal of Materials Research and Technology
In this work, Inconel 625 alloy is explored regarding high-temperature tensile deformation and fracture behaviors at a strain rate of 0.005–0.01 s−1 under a deformation temperature ranging from 700–800 °C. The subsequent analysis focuses on the impact of deformation parameters on flow and fracture characteristics. The fractured surface reveals that ductile fracture is dominated by the nucleation, growth, and coalescence of microvoids as the primary failure mechanisms. The elevated deformation temperature and reduced strain rate stimulate the level of dynamically recrystallized (DRX) structures, resulting in intergranular fractures. The Arrhenius model and the particle swarm optimization-artificial neural network (PSO-ANN) model are developed to predict the hot tensile behavior of the superalloy. It indicates that the PSO-ANN model exhibits a correlation coefficient (R) as high as 0.9967, surpassing the corresponding coefficient of 0.9344 for the Arrhenius model. Furthermore, the relative absolute error of 9.13% (Arrhenius) and 1.85% (PSO-ANN model) are recorded. The developed PSO-ANN model accurately characterizes the flow features of the Inconel 625 superalloy with high precision and reliability.