A partitioned stator hybrid excited machine is proposed, in which the permanent magnets and field windings are alternately placed on an inner stator separated from the outer stator having armature windings. This machine inherits the features of brushless machines and benefits from better space utilization. The operating principle and the effects of slot/pole combinations are investigated in detail. Further, based on 2-D finite-element analysis, the electromagnetic performances of the proposed machines, including back-electromotive force, cogging torque, flux regulation range, torque capability, power factor and torque-speed curve, are evaluated. The results reveal that the proposed machines can exhibit wide flux regulation range as well as good torque density. The prototype is manufactured and tested to validate the predictions.
7 November 2018 in IEEE Transactions on Industry Applications
Variable flux memory (VFM) permanent magnet (PM) machines exhibit an additional degree-of-freedom for control, i.e. PM magnetization state, and thus excellent flux controllability. Moreover, the hybrid PM topologies having variable PM (VPM) with low coercive force and constant PM (CPM) with high coercive force at the same time, are employed to improve the torque density and the flux controllability. The parallel and series connections between the two different kinds of PMs are both feasible. Based on equivalent magnetic circuits, two-dimensional (2-D) finite element (FE) analyses and experiments, the VFM machines with these two connection types are investigated and compared in this paper. The results reveal that the VPM with series connected CPM is beneficial for more stable working point and higher torque density. A pair of VFM prototypes with parallel and series hybrid PMs respectively are manufactured and tested to validate the analyses.
23 January 2017 in IEEE Transactions on Energy Conversion
A novel partitioned stator (PS) hybrid excited (HE) switched flux (SF) (PS-HESF) machine is proposed in this paper. In the PS-HESF machine, the permanent magnets (PMs) and field windings are allocated on one stator while the armature windings are placed on the other. The iron-piecerotor is sandwiched between the two stators. Consequently, compared with the conventional HESF machine having PMs, field windings as well as armature windings all on one stator, the available space of the novel machine is greatly boosted and therefore the performance is enhanced. Based on twodimensional (2-D) finite element (FE) analysis, the electromagnetic performance of the PS-HESF machine is evaluated and the results reveal that it can exhibit not only better flux regulation capability but also higher torque than the conventional HESF machine. Moreover, the influences of the key design parameters on the hybridization ratio in the PSHESF machines are investigated. A prototype machine is manufactured and tested to validate the predictions.
A series hybrid variable flux memory (VFM) machine employing two kinds of permanent magnets (PMs) on alternate rotor poles is investigated in this paper. This VFM machine features controllable PM flux and thus good flux-weakening capability, as well as improved torque density. However, it is found that the unipolar end leakage flux occurs if the two kinds of PMs are not balanced. According to the analyses of series connection between two PMs based on the fundamental magnetic circuit, the mechanism of the unbalanced rotor poles and the unipolar end leakage flux is revealed. Further, the rule of obtaining balanced poles is identified and the effects of operating conditions are presented. A series hybrid VFM machine prototype is fabricated and tested to validate the analyses.
14 August 2019 in IEEE Transactions on Industrial Electronics
In this paper, the flux reversal permanent magnet (FRPM) machine with toroidal windings is presented and analyzed with reference to conventional concentrated windings. Firstly, the influence of rotor pole numbers on FRPM machines with conventional concentrated windings is investigated. It is found that although the 12/13 stator slot/rotor pole FRPM machine has a high back-EMF, the pitch factor and magnet flux utilization ratio of concentrated windings are very low. By adopting toroidal windings instead of concentrated windings in the 12/13 FRPM machine, the pitch factor and resulted machine performance can be effectively improved. Finite element analysis shows that the 12/13 FRPM machine with toroidal windings can produce 79% higher torque than its counterpart with concentrated windings. Then, the critical design parameters and detailed electromagnetic performance of FRPM machines with both winding types are analyzed and compared. It is shown that the machine with toroidal windings has higher torque, efficiency, power factor and lower torque ripple, making it particularly suitable for low-speed, high-torque, and axial length limited applications. In addition, other feasible stator slot/rotor pole combinations to use toroidal winding are identified, with the aid of equivalent pole-pair number. Finally, two 12/13 FRPM prototypes are tested to validate the analyses.
14 April 2020 in IEEE Transactions on Energy Conversion
The torque production mechanism of switched reluctance machines (SRMs) is investigated from the perspective of air-gap field modulation principle. The unipolar stator current excitations can be divided into DC and AC components and they induce the air-gap magneto-motive force (MMF) respectively. Meanwhile, thanks to the salient structure in SRMs, the air-gap MMFs induced by the two sources above can be modulated to obtain the synchronized air-gap fields for torque production. It is revealed that a multitude of field harmonics contribute to the torque together. The MMF-permeance model is built and the analytical deduction of the field modulation effect is provided, with which the orders of the field harmonics contributing to the torque output can be identified. Moreover, finite element method is employed to verify the predictions on various SRM topologies. Finally, a prototype machine is fabricated and measured for validation.