All-solid-state batteries have attracted wide attention for high-performance and safe batteries. The combination of solid electrolytes and lithium metal anodes makes high-energy batteries practical for next-generation high-performance devices. However, when a solid electrolyte replaces the liquid electrolyte, many different interface/interphase issues have arisen from the contact with electrodes. Poor wettability and unstable chemical/electrochemical reaction at the interfaces with lithium metal anodes will lead to poor lithium diffusion kinetics and combustion of fresh lithium and active materials in the electrolyte. Element cross-diffusion and charge layer formation at the interfaces with cathodes also impede the lithium ionic conductivity and increase the charge transfer resistance. The abovementioned interface issues hinder the electrochemical performance of all-solid-state lithium metal batteries. This review demonstrates the formation and mechanism of these interface issues between solid electrolytes and anodes/cathodes. Aiming to address the problems, we review and propose modification strategies to weaken interface resistance and improve the electrochemical performance of all-solid-state lithium metal batteries.

Lithium−sulfur batteries are one of the most promising energy storage systems due to their high energy density. Many efforts have been made to improve the electrochemical performance of lithium−sulfur batteries. However, the complex and time-consuming preparation process hinders their practical application. In this work, an ultra-fast and facile method has been proposed to prepare the sulfur/graphene composites in a simplified and time-saving preparation process with the assistance of microwave. Microwave is introduced to help sulfur fleetly deposit uniformly on the surface of graphene within just 30 s. Nano-sized sulfur within 30 nm is generated in this ultra-fast process. Lithium−sulfur batteries with as-prepared sulfur/graphene composites exhibit good cycling life with a capacity of 503.5 mAh g ⁻¹ at 0.2 C. This method makes it possible for lithium−sulfur batteries to be practical.