Charge storage characteristics of ultra-small Pt nanoparticle embedded devices were characterized by capacitance-voltage measurements. A unique tilt target sputtering configuration was employed to produce highly homogenous nanoparticle arrays. Pt nanoparticle devices with sizes ranging from ∼0.7 to 1.34 nm and particle densities of ∼3.3–5.9 × 1012 cm−2 were embedded between atomic layer deposited and e-beam evaporated tunneling and blocking Al2O3 layers. These GaAs-based non-volatile memory devices demonstrate maximum memory windows equivalent to 6.5 V. Retention characteristics show that over 80% charged electrons were retained after 105 s, which is promising for device applications.
A quantum-design approach to reduce the Auger losses in λ = 2 μm InGaSb type-I quantum well edge-emitting lasers is reported. Experimentally realized structures show a ∼3 × reduction in the threshold, which results in 4.6 × lower Auger current loss at room temperature. This is equivalent to a carrier lifetime improvement of 5.7 × and represents about a 19-fold reduction in the equivalent “Auger coefficient.”
An automated design approach using an evolutionary algorithm for the development of quantum cascade lasers (QCLs) is presented. Our algorithmic approach merges computational intelligence techniques with the physics of device structures, representing a design methodology that reduces experimental effort and costs. The algorithm was developed to produce QCLs with a three-well, diagonal-transition active region and a five-well injector region. Specifically, we applied this technique to Al Ga As/In Ga As strained active region designs. The algorithmic approach is a non-dominated sorting method using four aggregate objectives: target wavelength, population inversion via longitudinal-optical (LO) phonon extraction, injector level coupling, and an optical gain metric. Analysis indicates that the most plausible device candidates are a result of the optical gain metric and a total aggregate of all objectives. However, design limitations exist in many of the resulting candidates, indicating need for additional objective criteria and parameter limits to improve the application of this and other evolutionary algorithm methods.