Semiconductor membrane fuel cells are a new promising R&D for solid oxide fuel cells and proton ceramic fuel cells. There is a challenge of the electronic short circuit issue by using semiconductor to replace conventional electrolyte membrane. In this work, type II band alignment of the semiconductor heterostructure based on Mg-doped ZnO and ZnO can, on one hand, block electrons passing through the junction, and on the other hand, trigger the ionic properties of membrane to boost the fuel cell performance. The Mg doping into ZnO creates more oxygen vacancies at the surface of ZnO, leading to enhanced ionic transport, and meaningful fuel cell performance of 673 mW/cm2; while the Mg-doped ZnO/ZnO heterostructure fuel cell has delivered 997 mW/cm2 and OCV 1.04 V at 520 oC. It is worth highlighting that the constructed heterostructure interface, especially the band bending and constituted build-in electric field, plays a pivotal role in enhancing the ionic transport and suppressing the electron passing through the internal device. First principal calculations using density functional theory confirmed the doping of Mg and the formation of heterostructure with ZnO to help for enhancing charge carriers and separations. This work suggests that the constructed type II band alignment or the semiconductor heterostructure is useful for developing advanced fuel cells.
1 August 2013 in International Journal of Hydrogen Energy
In the last few decades, there has been remarkable progress in the development of solid oxide fuel cells (SOFCs) based on both traditional solid electrolyte materials and novel semiconductor membranes. However, limited attention has been given to the transition of SOFCs from oxide ion-based electrolyte membranes to semiconductor membrane devices, considering the overall perspective of materials, technology, and scientific principles. Traditional knowledge strictly dictates that semiconductors should not be used as the membrane unless these materials possess negligible electronic conduction. This is because semiconductor membrane materials typically exhibit significantly higher electrical conductivity, surpassing the inherent ionic conductivity. Interestingly, by using semiconductors as the membrane, numerous novel materials have been demonstrated in the literature, which seems difficult to understand from traditional SOFC knowledge. Therefore, there is an emerging need to summarize and explore new understanding and knowledge of materials, technology, and science of SOFCs and Semiconductor Membrane Fuel Cells and their transition. In this review, we attempted to summarize the gap between the current state of SOFCs and the advancements in new materials, technologies, scientific principles, and mechanisms driving the development of such devices.