The production of coal gangue, a by-product of coal mining and washing, is rapidly increasing due to growing energy consumption. As the accumulated coal gangue has not been appropriately utilized, this has resulted in a squander of resources, waste disposal problems, and environmental pollution issues. However, coal gangue, a form of solid waste, exhibits various potential applications in the field of recycling. Currently, the processing capacity and utilization rate of coal gangue are insufficient to meet the demands of global low-carbon environmental protection. As such, this paper provides a detailed overview of the physical and chemical properties of coal gangue and its resource utilization methods in the environmental field, particularly in soil remediation, soil reclamation, the preparation of adsorbents for heavy metals, dyes, and CO₂, and as catalysts for organic degradation and catalytic cracking. This review highlights the significance of coal gangue classification according to its properties for the comprehensive utilization of gangue. Additionally, we briefly introduce and discuss suggestions for future directions of research and development in this area. Nevertheless, with regard to the environmental impact of secondary pollution and the efficiency of coal gangue utilization, there remain numerous obstacles that hinder future research. This review is expected to provide significant insights into the development of coal gangue utilization strategies, potentially facilitating the efficient and practical large-scale management of solid waste.

Biofuels produced via thermochemical conversions of waste biomass could be sustainable alternatives to fossil fuels but currently require costly downstream upgrading to be used in existing infrastructure. In this work, we explore how a low-cost, abundant clay mineral, bentonite, could serve as an in situ heterogeneous catalyst for two different thermochemical conversion processes: pyrolysis and hydrothermal carbonization (HTC). Avocado pits were combined with 20 wt% bentonite clay and were pyrolyzed at 600 °C and hydrothermally carbonized at 250 °C, commonly used conditions across the literature. During pyrolysis, bentonite clay promoted Diels–Alder reactions that transformed furans to aromatic compounds, which decreased the bio-oil oxygen content and produced a fuel closer to being suitable for existing infrastructure. The HTC bio-oil without the clay catalyst contained 100% furans, mainly 5-methylfurfural, but in the presence of the clay, approximately 25% of the bio-oil was transformed to 2-methyl-2-cyclopentenone, thereby adding two hydrogen atoms and removing one oxygen. The use of clay in both processes decreased the relative oxygen content of the bio-oils. Proximate analysis of the resulting chars showed an increase in fixed carbon (FC) and a decrease in volatile matter (VM) with clay inclusion. By containing more FC, the HTC-derived char may be more stable than pyrolysis-derived char for environmental applications. The addition of bentonite clay to both processes did not produce significantly different bio-oil yields, such that by adding a clay catalyst, a more valuable bio-oil was produced without reducing the amount of bio-oil recovered.

Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies

Modified persimmon peel–montmorillonite composites (PMHC-KOH/NaHCO₃) for efficient and rapid removal of methylene blue (MB) were synthesized using hydrothermal carbonization and simple alkali impregnation. The surface properties and material compositions of the hydrochars were determined with SEM, zeta potential, and XRD, and the adsorption mechanism of MB on two modified hydrochars was analyzed with FTIR, XPS, and DFT calculation. The results showed that modified hydrochars with a rough surface structure and rich oxygen-containing groups exhibited a strong affinity for MB, and the adsorption capacity of PMHC-NaHCO₃ and PMHC-KOH for MB reached 121.28 mg/g and 278.41 mg/g, respectively, with PMHC-KOH achieving more rapid adsorption of MB, at a rate of 0.043 g/mg/min. After five adsorption/desorption cycles, the two modified hydrochars still maintained a high adsorption rate of MB (92.32%/98.43%). The excellent adsorption performance of the modified hydrochars was attributed to hydrogen bonding, π-π interaction, electrostatic attraction, and ion exchange. DFT calculations revealed that oxygen-containing groups of the modified hydrochars played an important role in the adsorption of MB and confirmed that electrostatic attraction, hydrogen bonding, and π-π interactions were the key forces for rapid and efficient adsorption of MB. The prepared adsorbents gave full play to the regenerative applicability of agricultural waste, the simple alkali impregnation method eliminated the need for the additional cost of pyrolysis and activation, and their application in MB adsorption realized the treatment of waste with waste.