Open cell aluminum foam having high porosity has the potential to increase the efficiency of a heat exchanger and also to be used for diverse other functions. However, being prone to fail easily under tensile mechanical load, their thermal forming using a laser has been proposed in the literature. This work investigates the effect of laser parameters, orientation-position-curvature of scan path, the number of scans, and foam thickness on the bending angle achieved while forming 95% porous pure aluminum (99.7% aluminum) open cell foam plates using a diode laser. Furthermore, the capability of laser forming to produce developable and nondevelopable surfaces out of this foam has been demonstrated. Higher line energy gave a higher bending angle. Under the same line energy, the combination of higher power-higher scan speed produced a higher bending angle. In contradiction to laser forming of the sheet metal, no saturation or reduction in bending angle per scan pass was observed with an increase in scan pass number. This observation could be explained with the help of cell densification by previous scan passes leading to an increase in the coupling of more thermal energy for subsequent scan passes. Scan paths with increased curvature (or less radius) also produced higher bending due to a higher amount of cell collapse in the irradiated region.