In this study, the aroma profile of 10 single origin Arabica coffees originating from eight different growing locations, from Central America to Indonesia, was analyzed using Headspace SPME-GC-MS as the analytical method. Their roasting was performed under temperature–time conditions, customized for each sample to reach specific sensory brew characteristics in an attempt to underline the customization of roast profiles and implementation of separate roastings followed by subsequent blending as a means to tailor cup quality. A total of 138 volatile compounds were identified in all coffee samples, mainly furan (~24–41%) and pyrazine (~25–39%) derivatives, many of which are recognized as coffee key odorants, while the main formation mechanism was the Maillard reaction. Volatile compounds’ composition data were also chemometrically processed using the HCA Heatmap, PCA and HCA aiming to explore if they meet the expected aroma quality attributes and if they can be an indicator of coffee origin. The desired brew characteristics of the samples were satisfactorily captured from the volatile compounds formed, contributing to the aroma potential of each sample. Furthermore, the volatile compounds presented a strong variation with the applied roasting conditions, meaning lighter roasted samples were efficiently differentiated from darker roasted samples, while roasting degree exceeded the geographical origin of the coffee. The coffee samples were distinguished into two groups, with the first two PCs accounting for 73.66% of the total variation, attributed mainly to the presence of higher quantities of furans and pyrazines, as well as to other chemical classes (e.g., dihydrofuranone and phenol derivatives), while HCA confirmed the above results rendering roasting conditions as the underlying criterion for differentiation.

Oregano essential oil (OEO), due to its wide variety of biological activities, could be a “green” alternative to chemical preservatives. On the other hand, the difficulties in its use or storage have turned researchers’ interest in encapsulation strategies as a way to face stability and handling issues. Fabrication of OEO-loaded particles, using nano spray drying technique (NSD) and whey protein isolate-maltodextrin mixtures (1:1, 1:3) as wall materials appears to be a novel and promising strategy. The obtained particles were characterized in terms of volatile composition, encapsulation efficiency, and physicochemical, molecular, morphological, and antibacterial properties. The results confirmed that encapsulation of OEO using NSD achieved high levels of powder recovery (>77%) and encapsulation efficiency (>98%) while assisting in the retention of the main bioactive compounds. The partial replacement of WPI by MD significantly affected particles’ physical properties. FTIR analyses revealed the possible structural stabilization of core and wall materials, while SEM verified the very fine size and spherical shape. Finally, antibacterial studies demonstrated their activity against Escherichia coli and Staphylococcus aureus, which is much stronger in comparison with that of pure OEO, proving the positive effect of NSD and particles’ potential in future food applications.

Lemon juice was mixed with different carrier materials (maltodextrin, gum Arabic, carboxymethylcellulose) and dehydrated by nano spray drying, conventional spray drying and freeze-drying technique. The obtained powders were compared in terms of their morphology, moisture content, density, porosity, flow and reconstitution properties, and water sorption kinetics. Freeze-dried powders showed an irregular, compact morphology, while spray drying led to more uniformly sized fine spherical particles. Spray-dried powders with gum Arabic had low moisture, high density, but long wetting times and fair dispersibility linked to their smaller particle size and even surface. Fine particle characteristics of nano spray dried powders did not seem to favor their flow and dissolution properties while enhanced their moisture uptake. Conversely, carboxymethylcellulose-containing powders exhibited inferior characteristics likely due to their highly hygroscopic and aggregated structure.