James Butler

Dr. James Butler


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 April 2023 in Energies
Verified
Journal Article
Open access
PDF file
James ButlerJames Butler
James Butler
WSWill Skrivan
Will Skrivan
Samira LotfiSamira Lotfi
Samira Lotfi
The pretreatment of biomass through torrefaction is an effective means of improving the fuel quality of woody biomass and its suitability for use in existing facilities burning thermal coal. Densification of torrefied biomass produces a fuel of similar energy density, moisture content, and fixed carbon content to low-grade coals. Additionally, if the torrefaction conditions are optimized, the produced torrefied pellet will be resistant to weathering and biological degradation, allowing for outdoor storage and transport in a manner similar to coal. In untreated biomass, lignin is the primary binding agent for biomass pellets and is activated by the heat and pressures of the pellet extrusion process. The thermal degradation of lignin during torrefaction reduces its binding ability, resulting in pellets of low durability not suitable for transportation. The use of a binding agent can increase the durability of torrefied pellets/briquettes through a number of different binding mechanisms depending on the binder used. This study gives a review of granular binding mechanisms, as they apply to torrefied biomass and assesses a variety of organic and inorganic binding agents, ranking them on their applicability to torrefied pellets based on a number of criteria, including durability, hydrophobicity, and cost. The best binders were found to be solid lignin by-product derived from pulp and paper processing, biomass tar derived from biomass pyrolysis, tall oil pitch, and lime.

23 August 2024 in Fuels
Verified
Journal Article
Open access
PDF file
Emmanuel GaliwangoEmmanuel Galiwango
Emmanuel Galiwango
James ButlerJames Butler
James Butler
Samira LotfiSamira Lotfi
Samira Lotfi
Industrial scale-up of hydrothermal supercritical water gasification process requires catalytic integration to reduce the high operational temperatures and pressures to enhance controlled chemical reaction pathways, product yields, and overall process economics. There is greater literature disparity in consensus on what is the best catalyst and reactor design for hydrothermal gasification. This arises from the limited research on catalysis in continuous flow hydrothermal systems and rudimentary lab-scale experimentation on simple biomasses. This review summarizes the literature status of catalytic hydrothermal processing, especially for continuous gasification and in situ catalyst handling. The rationale for using low and high temperatures during catalytic hydrothermal processing is highlighted. The role of homogeneous and heterogeneous catalysts in hydrothermal gasification is presented. In addition, the rationale behind certain designs and component selection for catalytic investigations in continuous hydrothermal conversion is highlighted. Furthermore, the effect of different classes of catalysts on the reactor and reactions are elaborated. Overall, design and infrastructural challenges such as plugging, corrosion, agglomeration of the catalysts, catalyst metal leaching, and practical assessment of catalyst integration towards enhancement of process economics still present open questions. Therefore, strategies for catalytic configuration in continuous hydrothermal process must be evaluated on a system-by-system basis depending on the feedstock and experimental goals.

17 August 2023 in Waste
Verified
Journal Article
Open access
PDF file
YYYu Xiang Yao
Yu Xiang Yao
CRChandhini Ramu
Chandhini Ramu
APAllison Procher
Allison Procher
JLJennifer Littlejohns
Jennifer Littlejohns
JHJosephine Hill
Josephine Hill
James ButlerJames Butler
James Butler
The amount of municipal solid waste (MSW) generation in Canada was 34 million tonnes in 2018. Responsible waste management is challenging, but essential to protect the environment and to prevent the contamination of the ecosystem on which we rely. Landfilling is the least desirable option, and diversion through thermo-chemical conversion to value-added products is a good option for difficult-to-recycle waste. In this study, the amounts, moisture contents, heating values, and compositions of municipally collected solid waste produced in Canada are reported, a classification that is suitable for conversion purposes is proposed, and the potential for thermo-chemical conversion is determined. Much of the waste generated in Canada is suitable for being converted, and its potential for heat or electricity generation was determined to be 193 PJ/yr and 37 TWh/y, respectively. The GHG emissions that are saved through diversion from the landfill, while assuming the generated heat or electricity offsets natural gas combustion, gives a GHG reduction of 10.6 MMTCO2E/yr or 1.6% of Canada’s GHG emissions. The blending of waste in feedstocks can have varying effects on the amount of biogenic CO2 produced per unit energy in the feedstock, which is an important consideration for new projects. Other considerations include the heating values, moisture contents, and contaminant levels in the waste.

16 July 2021
Verified
Preprint
Open access
HGHongsheng Guo
Hongsheng Guo
SDShouvik Dev
Shouvik Dev
DSDavid Stevenson
David Stevenson
James ButlerJames Butler
James Butler
BTBoris Tartakovsky
Boris Tartakovsky
RHRhonda Hewko
Rhonda Hewko
Canada's remote communities experience harsh weather much of the year and run diesel generators 24 hours a day to provide heat and power. These generators utilize diesel fuel that is transported at great expense and generate greenhouse gas (GHG) and pollutant emissions. Meanwhile, remote communities produce organic wastes, such as wastewater and food wastes. Appropriate treatment