Mahnaz Arshad

Prof. Mahnaz Arshad

Associate professor
+1
orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 November 2023 in Clinical Case Reports
Verified
Journal Article
Open access
Mahnaz ArshadMahnaz Arshad
Mahnaz Arshad
NKNourin Khoramshahi
Nourin Khoramshahi
GSGholamreza Shirani
Gholamreza Shirani
Key Clinical Message: Subperiosteal implants might be the future first‐line treatment in patients with compromised alveolar ridges, although the use of proper techniques and pre‐surgical imaging is required to ensure treatment success. Severe bone loss puts the success of endosseous implants at risk. This technical report aims to introduce the subperiosteal implants (SPIs) created through additive manufacturing. A case study is presented, outlining the process and strategies employed to fully restore a maxillary structure using a customized subperiosteal implant. The patient, who had previously faced disappointment with traditional endosseous implants, received a customized SPI. A detailed 3‐year follow‐up is also provided. The design of the subperiosteal framework and abutments is based on digital records of the patient's jaw structure and a radiographic stent during occlusion. This ensures optimal placement within the dental arch. The implant and abutments are then three‐dimensional (3D) printed using a titanium alloy, while a provisional denture is 3D‐printed using polymer materials. SPIs offer a viable alternative for individuals with severe jaw bone degeneration, as demonstrated in this report detailing their application in complete maxillary restoration. This patient‐specific, prosthesis‐driven approach avoids the need for bone grafting and enables immediate functional recovery through a single surgical procedure.

1 November 2007 in Journal of Craniofacial Surgery
Verified
Journal Article
Closed access
SASamin Alavi
Samin Alavi
HGHossein Ghenaati
Hossein Ghenaati
FDFarideh Dezham
Farideh Dezham
Mahnaz ArshadMahnaz Arshad
Mahnaz Arshad
In LeFort I surgery, the separation of the pterygomaxillary junction is done by osteotomy. Although the osteotome is positioned too close to the maxillary artery and its branches during pterygomaxillary separation, postoperative complications from vascular injuries are uncommon. We describe an unusual occurrence of a maxillary artery pseudoaneurysm after LeFort I and bilateral sagittal split osteotomies for maxillary advancement and mandibular setback as well as (anterior sliding) genioplasty. In a patient with class III occlusion and midface retrusion, the significant bleeding began 10 days postoperatively, which was controlled by anterior and posterior nasal packing. The bleeding recurred 28 days after surgery; thus, vascular anatomy in the pterygomaxillary area is reviewed, pseudoaneurysm was diagnosed on selective carotid angiography and successfully treated by embolization; and 2-year follow up was uneventful.

1 January 2018 in The International Journal of Oral and Maxillofacial Implants
Verified
Journal Article
Closed access
Mahnaz ArshadMahnaz Arshad
Mahnaz Arshad
HMHosseinali Mahgoli
Hosseinali Mahgoli
LPLeila Payaminia
Leila Payaminia
Mahnaz Arshad, DDS, MSc/Hosseinali Mahgoli, DDS, MSc/Leila Payaminia, DDS, MSc: Purpose: To evaluate the effect of repeated screw joint closing and opening cycles and cyclic loading on abutment screw removal torque and screw thread morphology using scanning electron microscopy (SEM). Materials and Methods: Three groups (n = 10 in each group) of implant-abutment-abutment screw assemblies were created. There were also 10 extra abutment screws as new screws in group 3. The abutment screws were tightened to 12 Ncm with an electronic torque meter; then they were removed and removal torque values were recorded. This sequence was repeated 5 times for group 1 and 15 times for groups 2 and 3. The same screws in groups 1 and 2 and the new screws in group 3 were then tightened to 12 Ncm; this was also followed by screw tightening to 30 Ncm and retightening to 30 Ncm 15 minutes later. Removal torque measurements were performed after screws were subjected to cyclic loading (0.5 × 10⁶ cycles; 1 Hz; 75 N). Moreover, the surface topography of one screw from each group before and after cyclic loading was evaluated with SEM and compared with an unused screw. Results: All groups exhibited reduced removal torque values in comparison to insertion torque in each cycle. However, there was a steady trend of torque loss in each group. A comparison of the last cycle of the groups before loading showed significantly greater torque loss value in the 15th cycle of groups 2 and 3 compared with the fifth cycle of group 1 (P < .05). Nonetheless, torque loss values after loading were not shown to be significantly different from each other. Conclusion: Using a new screw could not significantly increase the value of removal torque. It was concluded that restricting the amount of screw tightening is more important than replacing the screw with a new one when an abutment is definitively placed.

1 November 2007 in Journal of Craniofacial Surgery
Verified
Journal Article
Closed access
GSGholamreza Omfs Shirani
Gholamreza Omfs Shirani
Mahnaz ArshadMahnaz Arshad
Mahnaz Arshad
FMFarnoush Omfs Mohammadi
Farnoush Omfs Mohammadi
Locally invasive benign tumor and large lesions such as ameloblastoma, giant cell granuloma, odontogenic keratocyst, and odontogenic myxoma are a benign, invasive, lesions of the jaws that predominantly affects the mandible. Despite the benign nature of these lesions, there is a high rate of local recurrence after curettage, which usually requires resection. The traditional surgical approach for resection of these lesions, via either mandibulotomy or mandibulectomy is extraoral approach which is associated with significant functional and esthetic sequelae. A case series is presented here in which less invasive and intraoral approach. An intraoral approach provides wide and fast access to the mandible. This approach represents a less invasive alternative that provides access to the mandible for curative resection of benign tumors with minimal postoperative sequelae. At 5 years follow-up, there were minimal functional and esthetic defects. We explored the use of the less invasive and more esthetic incision as an approach to resection and reconstruction of the mandible. It is our belief that these concerns have been best addressed by the minimally invasive procedure used in this report. This approach resulted in a minimal esthetic and functional defect even though a massive mandibular resection was performed.

2 January 2024 in Bioengineering
Verified
Journal Article
Open access
PDF file
SAShima Afrasiabi
Shima Afrasiabi
SBStefano Benedicenti
Stefano Benedicenti
Antonio SignoreAntonio Signore
Antonio Signore
Mahnaz ArshadMahnaz Arshad
Mahnaz Arshad
NCNasim Chiniforush
Nasim Chiniforush
The efficiency of antimicrobial photodynamic therapy (PDT) might be improved by using multiple wavelengths. This study investigates the sensitivity of implant-adherent biofilms of Staphylococcus aureus, Escherichia coli, and Candida albicans to indocyanine green (ICG)-808 nm diode laser, toluidine blue O (TBO)-635 nm diode laser, and hydrogen peroxide (HP)-980 nm diode laser and their combination when irradiated with dual-wavelength laser irradiation (simultaneously 980–635 nm or 980–808 nm). After an incubation period of 72 h, the infected implants were randomly divided into seven different treatment modalities: Control, HP, HP-PDT, TBO-PDT, HP-TBO-PDT, ICG-PDT, and HP-ICG-PDT. After the treatments, the colony-forming units (CFUs)/mL and reactive oxygen species (ROS) generation were determined. All evaluated disinfection methods were significantly effective against the three investigated bacteria compared to the control. The combined treatment of HP-ICG-PDT or HP-TBO-PDT had the greatest antibacterial effect compared to each treatment alone. There were statistical differences between HP-ICG-PDT and ICG-PDT or HP-TBO-PDT and TBO-PDT for all three bacteria studied. PDT with simultaneous dual-wavelength laser irradiation is an efficient strategy to improve the therapeutic effect of PDT.

3 October 2020 in Frontiers in Dentistry
Verified
Journal Article
Open access
SNSaeed Nokar
Saeed Nokar
HJHamid Jalali
Hamid Jalali
FNFarideh Nozari
Farideh Nozari
Mahnaz ArshadMahnaz Arshad
Mahnaz Arshad
Objectives: The success of implant treatment depends on many factors affecting the bone-implant, implant-abutment, and abutment-prosthesis interfaces. Stress distribution in bone plays a major role in success/failure of dental implants. This study aimed to assess the pattern of stress distribution in bone and abutment-implant interface under static and cyclic loadings using finite element analysis (FEA). Materials and Methods: In this study, ITI implants (4.1×12 mm) placed at the second premolar site with Synocta abutments and metal-ceramic crowns were simulated using SolidWorks 2007 and ABAQUS software. The bone-implant contact was assumed to be 100%. The abutments were tightened with 35 Ncm preload torque according to the manufacturer’s instructions. Static and cyclic loads were applied in axial (116 Ncm), lingual (18 Ncm), and mesiodistal (24 Ncm) directions. The maximum von Mises stress and strain values ​​were recorded. Results: The maximum stress concentration was at the abutment neck during both static and cyclic loadings. Also, maximum stress concentration was observed in the cortical bone. The loading stress was higher in cyclic than static loading. Conclusion: Within the limitations of this study, it can be concluded that the level of stress in single-unit implant restorations is within the tolerable range by bone.