The paper presents a modified adaptation algorithm for the super-twisted sliding mode controller structure, based on the barrier function method. The aim of the paper is to reduce the chattering phenomena of the controller, which limited the use of the controller in different applications. The chattering phenomena are mostly caused by the overestimated controller gain due to the assumed disturbance bound, which is mostly inaccurate. The chattering origins are also the unknown parasitic dynamic of the system and discrete implementation of the controller. The proposed method with the Barrier function is used to alleviate the chattering phenomena with the adaptation of the controller parameters. The novelty of the method is using an adaptation procedure only in prescribed regions of the sliding variable, otherwise, the adaptation is not used. The advantage of the method is the proper rejection of the chattering phenomena in the vicinity of the manifold of the sliding variable, regardless of the order of the system. With proper selection of the adaptation boundary, the effect of discrete implementation, especially for a longer sampling time of the algorithm, can be suppressed efficiently, as well as the effect of the overestimated controller parameters. The proposed method is verified and compared with a standard version of the algorithm in simulation and real-time environments.

This paper presents the design of a high-voltage pulse-based radar and a supervised data processing method for soil moisture estimation. The goal of this research was to design a pulse-based radar to detect changes in soil moisture using a cross-hole approach. The pulse-based radar with three transmitting antennas was placed into a 12 m deep hole, and a receiver with three receive antennas was placed into a different hole separated by 100 m from the transmitter. The pulse generator was based on a Marx generator with an LC filter, and for the receiver, the high-frequency data acquisition card was used, which can acquire signals using 3 Gigabytes per second. Used borehole antennas were designed to operate in the wide frequency band to ensure signal propagation through the soil. A deep regression convolutional network is proposed in this paper to estimate volumetric soil moisture using time-sampled signals. A regression convolutional network is extended to three dimensions to model changes in wave propagation between the transmitted and received signals. The training dataset was acquired during the period of 73 days of acquisition between two boreholes separated by 100 m. The soil moisture measurements were acquired at three points 25 m apart to provide ground truth data. Additionally, water was poured into several specially prepared boreholes between transmitter and receiver antennas to acquire additional dataset for training, validation, and testing of convolutional neural networks. Experimental results showed that the proposed system is able to detect changes in the volumetric soil moisture using Tx and Rx antennas.

This paper presents an automatic classification of plastic material’s inorganic pigment using terahertz spectroscopy and convolutional neural networks (CNN). The plastic materials were placed between the THz transmitter and receiver, and the acquired THz signals were classified using a supervised learning approach. A THz frequency band between 0.1–1.2 THz produced a one-dimensional (1D) vector that is almost impossible to classify directly using supervised learning. This paper proposes a novel pre-processing of 1D THz data that transforms 1D data into 2D data, which are processed efficiently using a convolutional neural network. The proposed pre-processing algorithm consists of four steps: peak detection, envelope extraction, and a down-sampling procedure. The last main step introduces the windowing with spectrum dilatation that reorders 1D data into 2D data that can be considered as an image. The spectrum dilation techniques ensure the classifier’s robustness by suppressing measurement bias, reducing the complexity of the THz dataset with negligible loss of accuracy, and speeding up the network classification. The experimental results showed that the proposed approach achieved high accuracy using a CNN classifier, and outperforms 1D classification of THz data using support vector machine, naive Bayes, and other popular classification algorithms.

This paper investigates the use of ground-penetrating radar (GPR) technology for detecting shallow buried objects, utilizing an air-coupled stepped frequency continuous wave (SFCW) radar system that operates within a 2 GHz bandwidth starting at 500 MHz. Different GPR data acquisition methods for air-coupled systems are compared, specifically down-looking, side-looking, and circular acquisition strategies, employing the back projection algorithm to provide focusing of the acquired GPR data. Experimental results showed that the GPR can penetrate up to 0.6 m below the surface in a down-looking mode. The developed radar and the back projection focusing algorithm were used to acquire data in the side-looking and circular mode, providing focused images with a resolution of 0.1 m and detecting subsurface objects up to 0.3 m below the surface. The proposed approach transforms B-scans of the GPR-based data into 2D images. The provided approach has significant potential for advancing shallow object detection capabilities by transforming hyperbola-based features into point-like features.

The presented paper describes accurate distance measurement for a field-sensed magnetic suspension system. The proximity measurement is based on a Hall effect sensor. The proximity sensor is installed directly on the lower surface of the electro-magnet, which means that it is very sensitive to external magnetic influences and disturbances. External disturbances interfere with the information signal and reduce the usability and reliability of the proximity measurements and, consequently, the whole application operation. A sensor fusion algorithm is deployed for the aforementioned reasons. The sensor fusion algorithm is based on the Unscented Kalman Filter, where a nonlinear dynamic model was derived with the Finite Element Modelling approach. The advantage of such modelling is a more accurate dynamic model parameter estimation, especially in the case when the real structure, materials and dimensions of the real-time application are known. The novelty of the paper is the design of a compact electro-magnetic actuator with a built-in low cost proximity sensor for accurate proximity measurement of the magnetic object. The paper successively presents a modelling procedure with the finite element method, design and parameter settings of a sensor fusion algorithm with Unscented Kalman Filter and, finally, the implementation procedure and results of real-time operation.