In recent decades, large amounts of construction and demolition waste (CDW) have been generated and accumulated throughout Europe, which is a challenge to manage and control nowadays. This work shows the results of a study carried out with samples of ceramic recycled aggregates (CRAs) and recycled concrete aggregates (RCAs) mixed with cement (C) in mortars. The main objective of this research is to demonstrate how, by adding CRAs and RCAs to a mixture of cement and natural aggregate (NA), it is possible to develop a high-strength mortar and achieve the best mixing ratio. To achieve these objectives, the characterization of the samples was initially carried out such as XRF, XRD and SEM. Next, tests were carried out on the products obtained, such as the consistency of the fresh mortar and the density of the specimens. Finally, a study of mechanical compressive strength was performed at 7, 28 and 200 days. The results show that although both CRAs and RCAs negatively affect the curing process of the specimens, it is possible to develop mortars with compressive strengths greater than 20 MPa. An obvious increase in mechanical compressive strengths was seen between 7 and 200 days of analysis. The results achieved in this research could be an important guide for the management of CDWs by local industries, thus favouring the development of the circular economy.

The eruption of the Cumbre Vieja volcano on 19 September 2021, resulted in the deposition of large quantities of volcanic ash (VA), causing a great impact on the citizens. This work aims to study the properties of this volcanic ash as pozzolanic raw materials to establish their potential use in the development of sustainable cement. Results of chemical and technical characterization are presented. To achieve this goal, Ordinary Portland Cement (OPC) was replaced with standardized percentages of OPC/VA: 10, 25, and 40%. Characterization studies were carried out using chemical analysis of X-ray fluorescence (XRF), chemical quality analysis (QCA), pozzolanicity test (PT) at 8 and 15 days, as well as determining the mechanical strength (MS) at 7, 28, and 90 days. The results obtained by XRF and QCA established that the chemical composition of the VA corresponds to that of the natural pozzolan typical of pyroclastic genesis. The PT test showed that the analyzed samples have a marked pozzolanic nature, both at 8 and 15 days, showing a significant increase in their hydraulic reactivity. Likewise, the MS tests confirmed a continuous increase in mechanical compressive strength, which increased significantly from 7 to 90 days of curing, reaching more than 58 MPa. On the other hand, mechanical tests showed that the three types of dosages used OPC/VA: 10, 25, and 40% were equally effective, with OPC/VA formulations: 10–25% being the most effective. The results obtained in this research could be used by local industries as a guide for the correct use of the volcanic materials of this island, both for the manufacture of construction materials, such as aggregates, and to produce pozzolanic cement with low CO₂ emissions, thus having a positive impact on the environment. Finally, the great natural availability of natural VAs in the surrounding areas of La Palma could cover part of the needs for materials used in the construction and restoration of houses and infrastructures damaged during the volcanic eruption.

Mining activity is the second biggest producer of waste in the European Union (EU), so to develop processes that allow the reuse of waste and the consequent creation of markets for these secondary raw materials are relevant for a desirable transition to a circular economy. Copper waste such as cakes, tailings, pyrite roasting residues, or slags present very different physical characteristics and hazards. There are two important aspects to consider for the residue of hazardous determination and its reuse: the particle size and the leaching behavior. Also, the reactive or non-reactive property of the waste depends on their origin, which is important for new applications. Based on these parameters (and other specifics for each application), the intention of this paper is to review and study the different applications of copper residues, aiming for new possibilities of cement-based construction materials with added value that allow to economically justify the use of cement.

Spain and Italy stand out as frontrunners in renewable energy adoption, particularly in photovoltaic (PV) technology, as part of the strategy for the Energetic Transition to clean sources. However, as Europe progresses towards clean energies, managing the end-of-life waste from solar panels emerges as a pressing challenge. In the coming years, the PV waste will grow exponentially, reaching 23 and 39 kt in 2030 in Italy and Spain, respectively. European regulations require that these wastes be properly managed using Circular Economy techniques to maximise the recovery of its components. Among these components, Si or Cu (CRM) are particularly important because of the supply risk and strategic importance to the EU. This study aims to forecast the magnitude of this waste stream in Spain and Italy from 2024 to 2030, both significant players in solar energy production, while also exploring the potential economic opportunities associated with its recycling.

The construction sector uses high quantities of raw materials and consequently the demolition sector generates huge amounts of waste. Envisioning the future of the construction sector, new Circular Economy Business Models should be implemented to contribute to the development of the sector. These Business Models will be based on innovative recycling techniques able to provide the technical requirements of the construction materials. This work aims to valorize ceramic and concrete wastes as aggregates for the mortar manufacturing. The chemical composition of these materials with high proportion of silica and very low quantities of sulfates makes them appropriate for their application. The wastes were previously crushed to the required particle size (6mm). The crushed ceramic waste presents an important fines proportion, which will increase the water consumption in the mortar mixes.