The reconstruction algorithm for the probabilistic inspection of damage (RAPID) is aimed at localizing structural damage via the signal difference coefficient (SDC) between the signals of the present and reference conditions. However, tomography is only capable of presenting the approximate location and not the length and angle of defects. Therefore, a new quantitative evaluation method called the multiple back propagation neural network (Multi-BPNN) is proposed in this work. The Multi-BPNN employs SDC values as input variables and outputs the predicted length and angle, with each output node depending on an individual hidden layer. The cracks of different lengths and angles at the center weld seam of offshore platforms are simulated numerically. The SDC values of the simulations and experiments were normalized for each sample to eliminate external interference in the experiments. Then, the normalized simulation data were employed to train the proposed neural network. The results of the simulations and experimental verification indicated that the Multi-BPNN can effectively predict crack length and angle, and has better stability and generalization capacity than the multi-input to multi-output back propagation neural network.

The finite-time synchronization (FNTS) problem for a class of delayed fractional-order fully complex-valued dynamic networks (FFCDNs) with internal delay and non-delayed and delayed couplings is studied by directly constructing Lyapunov functions instead of decomposing the original complex-valued networks into two real-valued networks. Firstly, a mixed delay fractional-order mathematical model is established for the first time as fully complex-valued, where the outer coupling matrices of the model are not restricted to be identical, symmetric, or irreducible. Secondly, to overcome the limitation of the use range of a single controller, two delay-dependent controllers are designed based on the complex-valued quadratic norm and the norm composed of its real and imaginary parts’ absolute values, respectively, to improve the synchronization control efficiency. Besides, the relationships between the fractional order of the system, the fractional-order power law, and the settling time (ST) are analyzed. Finally, the feasibility and effectiveness of the control method designed in this paper are verified by numerical simulation.