Gluten-free (GF) batters usually present several technological challenges that limit the performance during conventional baking and the resulting product quality. Due to the volumetric heating principle and faster heating rates, ohmic heating (OH) may be advantageous compared with conventional baking. Therefore, the potential of using ohmic heating as a novel approach for gluten-free bread baking was explored. In detail, the effect of different OH process parameters (power input, holding time) on the chemical and functional properties (specific volume, crumb firmness and relative elasticity, pore properties, color, starch gelatinization) and digestibility of breads was investigated. Results showed that GF breads could benefit from the uniform rapid heating during processing, as these breads showed superior functional properties (specific volume, 2.86–3.44 cm³/g; relative elasticity, 45.05–56.83%; porosity, 35.17–40.92%) compared with conventional oven-baked GF bread (specific volume, 2.60 cm³/g; relative elasticity, 44.23%; porosity, 37.63%). In order to maximize bread expansion and the OH performance, it was found that the OH process could be improved by applying the electrical energy in three descending power steps: first step with high power input (in this study, 2–6 kW for 15 s), followed by 1 kW for 10 s, and 0.3 kW for 1–30 min. In total, ohmic baking only needed a few minutes to obtain a fully expanded GF bread. The determination of pasting properties and starch digestibility demonstrated that these breads were comparable or even superior to GF breads baked in a conventional baking oven.

As bread is a very important staple food, its spoilage threatens global food security. Ropy bread spoilage manifests in sticky and stringy degradation of the crumb, slime formation, discoloration, and an odor reminiscent of rotting fruit. Increasing consumer demand for preservative-free products and global warming may increase the occurrence of ropy spoilage. Bacillus amyloliquefaciens, B. subtilis, B. licheniformis, the B. cereus group, B. pumilus, B. sonorensis, Cytobacillus firmus, Niallia circulans, Paenibacillus polymyxa, and Priestia megaterium were reported to cause ropiness in bread. Process hygiene does not prevent ropy spoilage, as contamination of flour with these Bacillus species is unavoidable due to their occurrence as a part of the endophytic commensal microbiota of wheat and the formation of heat-stable endospores that are not inactivated during processing, baking, or storage. To date, the underlying mechanisms behind ropy bread spoilage remain unclear, high-throughput screening tools to identify rope-forming bacteria are missing, and only a limited number of strategies to reduce rope spoilage were described. This review provides a current overview on (i) routes of entry of Bacillus endospores into bread, (ii) bacterial species implicated in rope spoilage, (iii) factors influencing rope development, and (iv) methods used to assess bacterial rope-forming potential. Finally, we pinpoint key gaps in knowledge and related challenges, as well as future research questions.

The aim of this investigation was to determine the influence of seven different Lactobacillus spp. (Lb.) strains compared with a commercial starter culture (CS) on the functional properties of gluten-free (GF) sourdough-breads. The sourdough stability of selected strains was also evaluated upon back-slopping. Results showed that the bread properties were greatly affected by the Lb. strains. Millet breads achieved lower specific volumes (1.80–2.19 cm³/g), higher crumb firmness (19.01–42.19 N) and lower relative elasticities (21.5–43.4%) than buckwheat breads. Compared with the CS, Lactobacillus pentosus and Lb. hammesii positively influenced the crumb firmness of buckwheat and millet breads, respectively, while Lb. paralimentarius enhanced this property in both breads. Only one of the two Lactobacillus sanfranciscencis strains was able to improve all functional properties in both GF breads. Back-slopping of the sourdoughs revealed stable properties in case of buckwheat, while maturity of the millet sourdough could not be reached. These observations were supported by the microbial count, metabolite production and carbohydrate consumption. Mature sourdough significantly improved the crumb firmness and porosity of the GF breads. These results highlighted the importance of selecting the appropriate lactic acid bacteria strains, to maximize the quality of GF bread.

Physicochemical and functional properties of arabinoxylans (AXs) can be significantly influenced by their isolation method. Finding balanced process conditions that allow optimal extraction yields while preserving AXs functionality is a challenge. The aim of this study was to determine the effect of different chemical solvents with neutral and alkaline pH on the intrinsic properties and extraction yield of AXs isolated from rye bran. Additionally, the application of xylanases and other cell wall degrading enzymes (Pentopan Mono BG, Deltazym XL‐VR, Viscoflow BG) to solubilize bound AXs was investigated. Results show that the use of Ca(OH) ₂ for isolation was superior to water and Na ₂ CO ₃ , as it selectively solubilized AXs and delivered isolates with a purity of up to 43.92% AX and a moderate ferulic acid (FA) content (209.35 ± 16.79 mg FA/100 g AX). Application of xylanases was further able to duplicate these achieved AX yields (7.50 to 9.85g AX/100 g bran). Additionally, isolates displayed highest ferulic acid contents (445.18 to 616.71 mg FA/100 g AX) and lowest impurities in comparison to chemical extracted AXs. Rheological characterization of the isolates showed a pronounced shear thinning behavior which fitted well to the power‐law model ( R ² > 0.989). Differences in pseudoplasticity of the isolates suggested that structural and chemical properties might have been responsible for this behavior.

Due to climate change sorghum might gain widespread in the Western countries, as the grain is adapted to hot climate. Additionally sorghum contains a notable amount of health-promoting nutrients. However, Western countries do not have a long history of sorghum consumption, and thus little experience in processing it. Milling systems in these areas were mostly developed for wheat or rye milling. In the present work, the effectiveness of sorghum milling when using a stone and a roller milling system (pilot scale) was investigated as well as its impact on the chemical and physical properties of the obtained flour fractions and whole-grain flours. Results showed that both milling systems could be successfully adapted to producing chemically and physically distinct flour and bran fractions from the small sorghum kernels. Fractions with increased bran material that contained higher amounts of ash, protein, fat, total dietary fiber, and total phenolic content but less starch, showed enhanced water absorption indices and water solubility indices. Interestingly, no significant difference was found in the ash and fat content of the different fractions obtained from stone milling. Overall, the study provided information on the production and composition of distinct flour fractions, which offer a wider range of future food applications.