A combined numerical approach featuring an immersed boundary and a cut cell method was implemented to discretize the conservation equations that model the discharge period of a solar energy accumulator based on phase change materials. The mathematical model consider three phases, i.e., the circulating fluid where a Low Reynolds model is used and the solid and liquid states of the phase change material for which a conjugate semi-implicit heat transfer scheme was implemented. Simulation results are compared with experimental data obtained from a laboratory scale solar accumulator containing paraffin wax as a phase change material finding good overall agreement.

In recent years, the fast growth of computational power has allowed the application of computational fluid dynamics (CFD) in a wide range of areas of interest, such as gas–solid unit operations. In this context, the multiphase particle-in-cell (MP-PIC) method appears as an option to represent fluid–particle and particle–particle interactions, avoiding the complexity of tracking each particle and the high computational cost derived from this. The MP-PIC method can represent the particles as a group with the same characteristics, allowing the simulation of gas–solid systems at different scales. To achieve this, the particle–particle interactions are simplified using the solid stress tensor to represent them; this does not require explicit expressions. This approach has a low computational cost, allowing the simulation of industrial cases using just workstations. This paper provides a review of the literature on the solid stress tensor and its commercial and non-commercial applications, including its historical and mathematical development in the description of particle–particle interactions. In addition, to consolidate the knowledge and advancing understanding in this crucial aspect of multiphase flow simulations, this review identifies the current challenges and opportunities for future research in multiphase systems based on the solid stress tensor. In addition, this review identifies the current challenges and opportunities for future research in multiphase systems based on the solid stress tensor.

This paper presents a numerical study of waste heat recovery from a fluid stream using thermoelectric devices. The system consisted of a square section duct with spherical porous media placed in its central region. Hot air circulates continuously through the duct and exchanges energy with the solid matrix and subsequently with the thermoelectric modules. The mathematical model of the system was solved using ANSYS/FLUENT software, requiring the implementation of user-defined functions (UDFs) and user-defined scalars (UDS) regarding porous media and thermoelectric generation modelling. From the simulations carried out, global efficiency and electrical power values were obtained in the range of [0.11–4.51] [%] and [0.01–12.77] [W], respectively. Furthermore, for the set of variables analysed, it was observed that the performance of the system is favoured by an increase in the fluid inlet temperature and speed, as well as by a higher external heat transfer coefficient.