Due to their unique advantages over traditional manufacturing processes, metal additive manufacturing (AM) technologies have received a great deal of attention over the last few years. Using current powder-bed fusion AM technologies, metal components are very expensive to manufacture, and machines are complex to build and maintain. Wire arc additive manufacturing (WAAM) is a new method of producing metallic components with high efficiency at an affordable cost, which combines welding and 3D printing. In this work, gas tungsten arc welding (GTAW) is incorporated into a gantry system to create a new metal additive manufacturing platform. Design and build of a simple, affordable, and effective WAAM system is explained and the most frequently seen problems are discussed with their suggested solutions. Effect of process parameters on the quality of two additively manufactured alloys including plain carbon steel and Inconel 718 were studied. System design and troubleshooting for the wire arc AM system is presented and discussed.
Low-velocity impacts during manufacturing and maintenance (e.g., tool drops) can induce barely visible impact damage in composite aircraft structures, motivating sensing-assisted approaches for rapid post-event assessment. This study proposes and validates a strain-based structural health monitoring framework for carbon-fiber-reinforced polymer (CFRP) panels by combining surface-mounted strain gauges with explicit finite element analysis (FEA). Drop-weight tests were con-ducted in accordance with ASTM D7136 using a 1.0 kg hemispherical impactor at drop heights of 250–400 mm. Three strain gauges were positioned at 1.25 mm, 32.5 mm, and 52.5 mm from the impact point to quantify the spatial attenuation of peak surface strain. The measured peak strains exhibited clear-dependent decay and increased with impact energy up to 350 mm, whereas the 400 mm case showed a non-monotonic response and a pronounced deviation from an elastic energy-scaling baseline, consistent with a transition to damage-dominated energy dissipation. Dedicated MSC Apex/Nastran Implicit simulations reproduced experimental trends and provided a physics-based digital twin for interpreting strain signatures in elastic regions, correlating them with likely damage states.
Aviation holds a significant position in the development and application of health monitoring technologies. In recent years, the integration of Advanced Health Monitoring Systems (AHMS) in aircraft has become increasingly important for ensuring flight safety, operational efficiency, and cost-effective maintenance. This chapter provides an overview of the historical development of AHMS in the aviation sector and discusses the fundamental approaches adopted in aircraft maintenance practices. Particular emphasis is placed on the measurement techniques and sensor systems utilized to monitor the health status of critical components. Furthermore, the chapter explores various data processing and modeling techniques used to analyze the information collected from onboard sensors, including predictive algorithms and condition-based maintenance strategies. By reviewing these technologies and methods, the chapter aims to highlight the growing role of health monitoring in enhancing aircraft reliability, reducing maintenance costs, and supporting proactive decision-making within the aviation industry.