Textile effluent released into water bodies is prone to be toxic for aquatic flora and fauna. In the present study, the phytoremediation potential of Chara vulgaris (C. vulgaris) is investigated for treatment of textile effluent. The highly concentrated and toxic textile effluent is diluted to different concentrations 10%, 25%, 50%, and 75% to check the accessibility of macroalgae to bear pollutant load of textile effluent. The toxicity of textile effluent is analysed by determining different water quality parameters, namely, pH, TDS, BOD, COD, and EC. The maximum reductions in TDS (68%), COD (78%), BOD (82%), and EC (86%) were found in the 10% concentrated textile effluent after 120 h of treatment. The highly concentrated textile effluent showed its toxic effect on macroalgae and it was found unable to show a remarkable change in water quality parameters of 75% and 100% textile effluent. The correlation coefficient values are determined using correlation matrix to identify the high correlation between different water quality parameters. The removal of toxic organic pollutants by C. vulgaris was confirmed by using UV-visible absorption spectra. Typical X-ray spectra recorded using EDXRF technique indicated the presence of heavy metals Cd in the dried sample of macroalgae after treatment which show its capability to remove toxic heavy metals from textile effluent. The reliability model has been proposed for treated textile effluents to identify percentage level of toxicity tolerance of waste water by macroalgae.
The aim of this work is to present a reliability and profit analysis of a two-dissimilar parallel unit system under the assumption that operative unit cannot fail after post repair inspection and replacement and there is only one repair facility. Failure and repair times of each unit are assumed to be uncorrelated. Using regenerative point technique various reliability characteristics are obtained which are useful to system designers and industrial managers. Graphical behaviors of mean time to system failure (MTSF) and profit function have also been studied. In this paper, some important measures of reliability characteristics of a two non-identical unit standby system model with repair, inspection and post repair are obtained using regenerative point technique
1 January 2019 in International Journal of Performability Engineering
The main aim of this research work is to present a reliability and availability analysis of a three-unit system (A, As, B) under the provision of replacement of a unit using the Genetic algorithm. One unit is in standby mode so that after the failure of one unit it can be active. But one unit which is dissimilar to the previous one can be replaced with the new one after the failure. It has been considered that there is only one repair man availability within the organization. Here in this paper we have used the Genetic algorithm for finding out the optimized availability of the system and also with the assistance of numbers of graphs we have analyzed reliability characteristics, availability of the framework, so the result of the paper will be very useful for the industry people.
23 June 2021 in Recent Advances in Computer Science and Communications
Background and Aim: With an increase in demands about the reliability of industrial machines following continuous or discrete distribution, the important thing to be noticed is that in all previous research works where systems had more than one failure, no iteration technique was studied to separate the failed unit on the basis of its failure. Therefore, the aim of our paper is to analyze the real industrial problems following cold standby units arranged in parallel manner with the new concept of inspection procedure for failed units to detect the exact failure and being the communicator to the repairman for repairing the exact failed part of the unit for saving time and maintenance cost. Methods: The geometric distribution and regenerative techniques were applied for calculating different reliability measures like mean time to system failure, availability of a system, inspection, repair and the time of unit failure. Results: Graphical and analytical analyses were also conducted to analyze the increasing/decreasing behavior of profit function w.r.t repair and failure rate. The system responded properly in fulfilling the basic needs. Conclusion: The calculated value of all reliability parameters proved helpful for studying any other models following the same concept under different environmental conditions. Thus, it can be concluded that, reliability increases with an increase in the repair and decreases with an increase in the failure rate. Also, the results evaluated in this paper provide the better reliability testing strategies that help develop new techniques which lead to increase the effectiveness of the system.