Li Song

Prof. Dr. Li Song


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 December 2021 in Mathematics
Verified
Journal Article
Open access
PDF file
LWLei Wu
Lei Wu
LSLi Song
Li Song
JLJintao Liu
Jintao Liu
ZYZhiwu Yu
Zhiwu Yu
The coupled action of concrete carbonation and repeated loading strongly influences the safety of reinforced concrete (RC) structures and substantially reduces service life. A novel corrosion-fatigue life prediction model for RC structures under coupled carbonation and repeated loading was developed. The effect of fatigue damage on concrete carbonation and carbonation-induced corrosion rate was considered, and the acceleration of fatigue damage accumulation due to reinforcement corrosion was considered in this approach. The proposed corrosion-fatigue life prediction model was illustrated by a 6 m-span RC slab in a simply supported slab bridge for the highway, and the effects of traffic frequency, overloading, carbonation environment grade, and environmental temperature and relative humidity on corrosion-fatigue life were discussed. The results indicate that the proposed model can predict the corrosion-fatigue life of RC structures simply and conveniently. Traffic frequency, overloading, carbonation environment grade, and environmental temperature and relative humidity can decrease the corrosion-fatigue life of the RC slab by up to 66.86%, 58.90%, 77.45%, and 44.95%, respectively. The research is expected to provide a framework for the corrosion-fatigue life prediction of RC structures under coupled carbonation and repeated loading.

8 June 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LSLi Song
Li Song
JLJintao Liu
Jintao Liu
CCChen-Xing Cui
Chen-Xing Cui
ZYZhiwu Yu
Zhiwu Yu
ZFZhi-Wei Fan
Zhi-Wei Fan
JHJian Hou
Jian Hou
The carbonation process of reinforced concrete (RC) beams considering the combined effect of fatigue load and environmental factors was investigated experimentally in an environmental simulation chamber based on meteorological environmental data. Fourteen beams were constructed and tested, and a carbonation numerical model (CNM) considering medium transport and fatigue damage characteristics was proposed to simulate the carbonation process of RC beams. Based on the experimental results, CNM is extended to reveal the effects of ambient temperature, relative humidity, carbon dioxide concentration, and fatigue damage on the carbonation process of RC beams. The results showed that the change in the pore structure of concrete can directly and accurately characterize the effect of fatigue damage on the transport characteristics of concrete. The porosity of concrete substantially increased with increasing levels of fatigue damage. Although fatigue damage did not have a significant effect on the most probable pore radius of the concrete, the total pore volume of the most probable pore notably increased. The results showed that both the carbonation depth and fatigue damage exhibit a three-stage development law. The depth and rate of carbonation are related to concrete pores and macroscopic cracks. In the carbonation analysis of fatigue-damaged RC beams, the changes in both the pore structure and fatigue cracks caused by repeated fatigue loading on carbonation should be considered.

31 August 2023 in Materials
Verified
Journal Article
Open access
PDF file
LSLi Song
Li Song
LWLei Wu
Lei Wu
LWLei Wu
Lei Wu
ZYZhiwu Yu
Zhiwu Yu
To minimize the adverse effects of high temperatures on the service performance of track structures, research on the application of reflective coatings on track structures is urgently needed. Based on meteorological data and the characteristics of the multi-layer structure of the ballastless track, refined finite element models (FEMs) for the temperature field and temperature effect analysis of the CRTS III slab ballastless track structure on bridges were established. The temperature deformation characteristics and temperature stress distribution of the CRTS III slab ballastless track under natural environmental conditions were investigated. Similarly, the influence of a reflective coating on the structural temperature field and temperature effect was studied. The results showed that the temperature and vertical temperature gradient of the track slab were significantly reduced after the application of the reflective coating. Meanwhile, the thermal deformation and thermal stresses of the track slab and the self-compacting concrete (SCC) layer were minimized. Under high-temperature conditions in summer, the maximum temperature of the track slab decreased from 47.0 °C to 39.6 °C after the application of the reflective coating, and the maximum vertical temperature gradient of the track slab decreased from 61.5 °C/m to 39.1 °C/m after the application of the reflective coating. Under the maximum positive temperature gradient, the peak displacement of the upper arch in the middle of the slab and the peak displacement of the sinking in the slab corner decreased from 0.814 mm and 1.240 mm to 0.441 mm and 0.511 mm, respectively, and the maximum transverse tensile stresses of the track slab reduced from 2.7 MPa to 1.5 MPa as well. In addition, the reflective coating could also inhibit the failure of the interlayer interface effectively. The results of this study can provide a theoretical basis and reference for the application of reflective coatings on ballastless tracks on bridges.

11 May 2022 in Construction and Building Materials
Verified
Journal Article
Closed access
LWLei Wu
Lei Wu
LSLi Song
Li Song
RLRan Liu
Ran Liu
HLHubing Liu
Hubing Liu
ZYZhiwu Yu
Zhiwu Yu
Lizhong JiangLizhong Jiang
Lizhong Jiang

13 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
LSLi Song
Li Song
LWLian Wang
Lian Wang
HSHongshuo Sun
Hongshuo Sun
CCChenxing Cui
Chenxing Cui
ZYZhiwu Yu
Zhiwu Yu
The development of fatigue damage in reinforced concrete (RC) beams is affected by various factors such as repetitive loads and material properties, and there exists a complex nonlinear mapping relationship between their fatigue performance and each factor. To this end, a fatigue performance prediction model for RC beams was proposed based on the deep belief network (DBN) optimized by particle swarm optimization (PSO). The original database of fatigue loading tests was established by conducting fatigue loading tests on RC beams. The mid-span deflection, reinforcement strain, and concrete strain during fatigue loading of RC beams were predicted and evaluated. The fatigue performance prediction results of the RC beam based on the PSO-DBN model were compared with those of the single DBN model and the BP model. The models were evaluated using the R2 coefficient, mean absolute percentage error, mean absolute error, and root mean square error. The results showed that the fatigue performance prediction model of RC beams based on PSO-DBN is more accurate and efficient.

29 October 2024 in Buildings
Verified
Journal Article
Open access
PDF file
CXChuanzhao Xu
Chuanzhao Xu
JHJian Hou
Jian Hou
BLBingfeng Liu
Bingfeng Liu
FLFangchao Lei
Fangchao Lei
LSLi Song
Li Song
In order to investigate the coordinated relationship between lateral deformation of the diaphragm wall and axial force of the internal strut, this paper first carried out a scaled model test on the mechanical features of a foundation pit support system based on a novel axial force servo device. Then, a finite element model was established to simulate the scaled model test, and the correctness of the finite element modeling approach was validated by comparing test results. After that, the same finite element modeling method was used to analyze the coordinated relationship between axial force and lateral deformation in the prototype foundation pit support structure. The results show that the axial force of the inner strut is negatively correlated with the lateral deformation in the diaphragm wall. The initial maximum lateral deformation in the diaphragm wall of the shaft foundation pit occurs at the bottom of the foundation pit, so changing the length of bottom strut simultaneously is the most effective way to adjust the mechanical behavior of the support structure. Under various support conditions, the maximum lateral deformation of the diaphragm wall in the prototype project is 0.59~0.66‰ of the total excavation depth of the foundation pit, and the maximum axial force of internal support is 11~30% of the yield load of a single steel strut.