ÖzetBu çalışmanın amacı STEM uygulamaları kapsamında 3D yazıcı kullanımına yönelik fen bilimleri öğretmen adaylarının görüşlerini ortaya çıkarmaktır. Nitel araştırma yöntemi kullanılmıştır. Araştırmada veriler, yarı yapılandırılmış öğrenci görüşme soruları kullanılarak toplanmıştır. Toplanan veriler içerik analizi yöntemi ile analiz edilmiştir. Bu çalışmaya gönüllülük esasına göre Fen Bilgisi Öğretmenliği 3. Sınıfta okuyan 37 öğretmen adayı katılmıştır. Çalışmaya katılan öğretmen adaylarına yarı yapılandırılmış görüşme soruları sorulmuştur. Çalışma sonunda 21 yy becerileri olarak ön plana çıkan ve bilgiyi somutlaştırma fırsatını sağlayan ortamlarda STEM eğitiminin öğrencilere; problem çözme, analiz ve sentez gibi üst düzey zihinsel becerileri daha etkin kazandırdığı tespit edilmiştir. 3D yazıcı kullanımı ile öğrenciler, tasarladıkları soyut objeleri somut hale kolayca dönüştürebilmektedirler. Böylece, tasarımlarını günlük hayatta da karşılığını görmeleri ve dokunabilmeleri öğrenciler için benzersiz bir deneyim olmaktadır. Bu çalışmada öğretmen adayları, tasarım yeteneği kazanmışlar ve bu sayede çevrelerinde gördükleri problemleri tespit edip bunlara tasarım programlarını kullanarak çözümler üretmeye başlamışlardır. Ayrıca öğretmen adaylarının 3D Yazıcıları kullanmaları onların çözüm odaklı ve daha üretken olmalarını sağladığı tespit edilmiştir. Araştırma sonucunda öğretmen adayları 3D yazıcıları; öğrenmede kolaylık sağlayan, bilgileri somutlaştıran, öğrenme sürecinde materyal desteği sağlayan ve 21 yy becerilerine ait olan bir teknoloji olarak tanımlamışlardır.0000-0002-0941-4969Abstarct The aim of this study is to reveal the opinions of prospective science teachers about the use of 3D printers within the scope of STEM applications. Qualitative research method was used. The data were collected using semi-structured student interview questions. The collected data were analyzed by content analysis method. In this study, 37 prospective teachers who participated in the third grade of Science Teacher Education participated on a voluntary basis. Semi-structured interview questions were asked to pre-service teachers. At the end of the study, STEM education was given to students in 21st century skills and environments that provided the opportunity to concretize knowledge; problem solving, analysis and synthesis. With the use of 3D printer, students can easily transform the abstract objects they design into concrete. Thus, it is a unique experience for students to see and touch their designs in daily life. In this study, pre-service teachers gained design skills and in this way, they identified the problems they saw around them and started to produce solutions by using design programs. In addition, it has been found that preservice teachers' use of 3D Printers makes them solution-oriented and more productive. As a result of the research, the prospective teachers used 3D printers; They are defined as a technology that makes learning easier, embodies knowledge, provides material support in the learning process and belongs to 21st century skills.
1 February 2018 in Anemon Muş Alparslan Üniversitesi Sosyal Bilimler Dergisi
Araştırmanın amacı, ortaokul 5, 6, 7 ve 8. sınıf Fen Bilimleri dersi sınav sorularının Bloom’un Bilişsel Alan Taksonomisine göre analizini yapıp, soruların nasıl bir dağılım gösterdiğini bulmaya çalışmaktır. Araştırmada nitel araştırma yaklaşımı çerçevesinde doküman inceleme yöntemi kullanılmıştır. Bu amaçla, 2013–2014 eğitim öğretim yılında Muş merkezde bulunan toplam 29 Fen Bilimleri öğretmeninden, Fen Bilimleri dersine ait 4868 adet yazılı sınav sorusu elde edilmiştir. 1. ve 2. döneme ait yazılı sınav sorusu alınmıştır. Bu soruların analizleri uzman görüşleri doğrultusunda yapılmıştır. 29 Fen Bilimleri öğretmeninden 21 öğretmenle mülakat yapılıp çıkan sonuçların sebepleri araştırılmıştır. Bloom’un Bilişsel Alan Taksonomisine göre yapılan analizler neticesinde toplam soruların %59,5’i bilgi, %20,4’ü kavrama, %13,4’ü uygulama, %5,2’i analiz, %1,5’i sentez ve %0’ı değerlendirme düzeyinde olduğu saptanmıştır.
6 May 2020 in Ağrı İbrahim Çeçen Üniversitesi Sosyal Bilimler Enstitüsü Dergisi
Öz Bu çalışmanın amacı STEM uygulamaları kapsamında, kodlama eğitimine yönelik fen bilimleri öğretmen adaylarının görüşlerini ortaya çıkarmaktır. Bu kapsamda çalışmaya gönüllülük esasına göre, 2018-2019 eğitim ve öğretim yılında bir devlet üniversitesinde okuyan Fen Bilgisi Öğretmenliği 3. Sınıf öğretmen adayı katılmıştır. Çalışmada nitel araştırma yöntemi kullanılmıştır. Çalışmanın verileri, STEM uygulamaları kapsamında kodlama eğitimi alan 37 kişilik bir çalışma gurubu ile yarı yapılandırılmış öğrenci görüşme soruları kullanılarak toplanmıştır. Toplanan veriler içerik analizi yöntemiyle analiz edilmiştir. Çalışma sonunda öğretmen adayları STEM uygulamaları kapsamında verilen kodlama eğitiminin öğrenmede teoriden çok uygulamaya yönelttiği, öğrenmede kalıcılığın artırdığı, zevk alarak öğrenmeyi sağladığı, sistematik ve alternatif düşünme becerilerinin geliştirdiğini beyan etmişlerdir. Bu çalışma STEM eğitimi kapsamında fen bilimleri ve kodlamanın bütünleştirilmesi ile anlaşılması zor olan soyut bazı fen kavramlarının somutlaştırılarak, öğrenmenin kalıcı ve daha anlamlı olmasının sağlandığını göstermektedir. Abstract The aim of this study is to reveal the opinions of prospective science teachers about coding education within the scope of STEM applications. Within the scope of this study, on the voluntary basis, the prospective 3rd year teacher of science teaching at a state university participated in the 2018-2019 academic year. Qualitative research method was used in the study. The data of the study was collected by using a semi-structured student interview questions with a study group of 37 people who received coding training within the scope of STEM applications. The collected data were analyzed by content analysis method. At the end of the study, prospective teachers stated that coding education given within the scope of STEM applications led to practice rather than theory in learning, increased permanency in learning, provided learning with pleasure, and developed systematic and alternative thinking skills. This study shows that some abstract science concepts which are difficult to understand by integrating science and coding within the scope of STEM education, make learning more permanent and meaningful.
30 November 2021 in International Journal of Engineering Technologies and Management Research
STEM education, which focuses on improving students' 21st century skills, aims to increase interest in engineering professions that have a very important place in the future of the world. Due to continuous innovation in technologies, it is critical to provide STEM and robotics coding training to students. Knowing the content of studies in our country related to STEM is of great importance for awareness of its use in science course. The aim of this study is to investigate the effect of robotics coding STEM activities on teacher candidates ' awareness of their use in science course. 37 science teacher candidates participated in the 12-week study. Qualitative research method was used in this study. Qualitative data was taken from the field notes and semi-structured interview. As part of STEM activities, it is aimed to teach teacher candidates Robotics Coding. In the activities, Arduino IDE, Fritzing programs were taught. Robotics coding STEM activities have had a positive impact on teacher candidates. Teacher candidates reported that activities increased their interest and attitude to science, and that they were instructive, fun, and useful. Teacher candidates expressed that robotics coding activities integrated into education system enabled making learning permanent.
15 December 2023 in European Journal of Mathematics and Science Education
3D printer technology and 3D design are used in many fields and are gaining various uses day by day. It is seen that the quality of education and training has increased with the effective use of 3D technology in the education and training environment. This study aims to investigate the attitudes of Pre-Service Teachers about the use of 3D printer activities made with Tinkercad in science education. 43 science pre-service teachers participated in the study, which lasted 8 weeks. A mixed research method was used in this study. The problem-solving scale and the attitude scale towards the use of 3D printers in science education were applied to the pre-service teachers. To collect the research data, the attitude scale was applied as a pre-test and post-test. For Paired samples, a t-test was applied and analyses were performed. In qualitative studies, semi-structured student interview questions were applied. According to the findings of the study, there was a significant increase in students' positive attitudes towards the use of 3D printers in science education. Tinkercad and 3D printer trainings have been given and applications have been made within the scope of these trainings. There have been 6 activities related to 3D printers. Thanks to 3D printers, students have the opportunity to present creative ideas and things they imagine to life by making designs in their minds. It seems that abstract concepts related to the sciences are embodied with a 3D printer and turned into tangible objects. Examining a physical object makes it easier for students to identify mistakes they have made in designs. It is seen that they do creative and solution-oriented work against the problems they encounter. Thus, it is predicted that learning will be more permanent and effective.
26 July 2022 in Education and Information Technologies