The powder bed fusion-based additive manufacturing process uses a laser to melt and fuse powder metal material together and creates parts with intricate surface topography that are often influenced by laser path, layer-to-layer scanning strategies, and energy density. Surface topography investigations of as-built, nickel alloy (625) surfaces were performed by obtaining areal height maps using focus variation microscopy for samples produced at various energy density settings and two different scan strategies. Surface areal height maps and measured surface texture parameters revealed the highly irregular nature of surface topography created by laser powder bed fusion (LPBF). Effects of process parameters and energy density on the areal surface texture have been identified. Machine learning methods were applied to measured data to establish input and output relationships between process parameters and measured surface texture parameters with predictive capabilities. The advantages of utilizing such predictive models for process planning purposes are highlighted.
1 December 2020 in Journal of Trace Elements in Medicine and Biology
Fracture prediction is one of the challenging problems in sheet metals. Forming limit curves at fracture (FLCF), as a tool to determine fracture in sheet metal processes, are obtained through the use of numerical analyses. As one of the approaches, the ductile fracture criteria (DFCs) represent the fracture initiation of the sheets formed by different loading histories. In this study, the effects of three different hardening models on different DFCs to predict the fracture for stainless steel 304L have been investigated. The results show that most of DFCs work better in the region ɛ2 0 where the stretching conditions are dominant, none of them could precisely estimate the fracture initiation.
This paper presents the design and manufacturing of a pin on disk tribometer aimed at performing friction and wear testing as accurate as a professional tribometer at a lower cost. Since friction is an important part of our lives and its application varies greatly in size, environment and other factors, testing can be expensive. Tribometers are instruments where these conditions can be simulated experimentally. They are manufactured by various companies abroad and are imported to Turkey. For this reason, the cost of these instruments is very high. The design of the proposed tribometer prioritizes portability and low cost of manufacturing. The manufacturing process of the various parts are discussed in detail. The tribometer was manufactured in the ATILIM University manufacturing laboratories within a tight budget using CNC machining. The instrument has the full capability to adjust the load, testing radius, motor speed, and the duration of the test before starting the experiments. To handle the electronics and data gathering within the instrument, Arduino boards and software are utilized. Real-time data streaming is made possible for data analysis tasks both during and after the experiments. The paper also provides the results of experiments that are obtained from the newly developed tribometer and comparisons with a mass produced, professional tribometer. The experiments are conducted with the same type of samples and with the same parameters. The proposed tribometer provides researchers with easily accessible friction data that is within close range to what they would get from a professional tribometer.