Recent developments in sixth-generation (6G) communication systems have increased interest in using sub-terahertz frequencies, particularly the W-band (75–110 GHz), for high-capacity indoor links. At these frequencies, electromagnetic (EM) wave attenuation introduced by building materials becomes a key factor limiting system performance. The objective of this study is to provide continuous, laboratory-validated attenuation characteristics of commonly used construction and finishing materials across the full W-band. Measurements were conducted in an accredited electromagnetic compatibility laboratory using a calibrated far-field setup with a vector network analyzer, W-band frequency extenders, and standard-gain horn antennas inside an anechoic chamber. For each frequency point, 20 measurements were recorded under controlled environmental conditions. The results show distinct attenuation behaviour depending on material type: wood-based materials exhibit 6–13 dB/cm, construction materials 2–4 dB/cm, and insulation materials below 0.3 dB/cm, while ceramic materials exceed 15–23 dB/cm. A general increase in attenuation with frequency is observed, particularly for materials with higher dielectric losses. The presented dataset enables more accurate indoor propagation modelling, supports ray-tracing and link-budget analyses, and provides practical guidelines for designing radio-transparent building components for future 6G communication systems.

This paper analyses the function of an innovative integrated receiver for the measurement of electromagnetic field emissions. The autonomous receiver measures and registers the elevated emission levels of both components of the EM field originating from rocks subjected to increased mechanical stress. The receiver’s sensitivity of 60 µV/m, its dynamic range of 98 dB, and its impulse response of 0.23 V/µs were determined in laboratory conditions. Real EM field signals from hard coal samples subjected to crushing force were recorded using an autonomous receiver. The observed and recorded results confirm that the receiver operates in the full range of amplitudes of the EM field signal emitted from the rock. The results determine the band of characteristic signals for EM field emission from hard coal. The system created on the basis of autonomous EM receivers can support the existing seismic safety systems in real mine conditions by predicting the possibility of mine collapse hazards.

This article presents the design of an innovative receiver capable of identifying electric and magnetic components of electromagnetic fields. The receiver senses and records electromagnetic disturbances generated as mine tunnels collapse. It offers excellent operating specification and the ability to sense and log magnetic and electrical component strength values in real time. The paper analyzes the data obtained with the use of a system installed in a working mine and attempts to determine hazards resulting from increased rock stress levels that, cause spontaneous EM emissions.

The article presents a new research apparatus for measuring the electromagnetic activity of landslides. The basic element of the apparatus is a highly sensitive underground receiver of the magnetic component of the EM field. Such a receiver inserted to the full depth of a landslide well records...

The article presents the results of research concerning electromagnetic (EM) field emitted by rocks during the process of their destruction. The paper describes a measuring stand designed for subjecting rock samples to axial crushing. During the destruction of rock samples, both components of the electromagnetic field emitted by the rock were recorded. The paper presents the results of research on hard coal samples, presenting the obtained time domain waveforms and frequency spectrum of the emitted EM field components. Further potential uses of tests concerned with EM emitted by rocks are determined. Applications registering EM field in mine environments may provide an early mine collapse warnings.

The paper presents the results of grid power quality tests and wide frequency electromagnetic radiation level tests to which home power networks with photovoltaic systems have been subjected. The said results are meaningful from the point of view of safety and compatibility of electrical devices and the power supply system they are connected to. The tests covered stability of phase voltage and its frequency, harmonic level flicker, as well as RF radiated and emission levels. The measurements performed provide an answer to the question concerning the level of compliance of randomly selected home-installed PV systems with applicable recommendations and regulations concerning electromagnetic compatibility. The ability to meet the applicable standards translates into the health and safety of building inhabitants, which is the ultimate goal. Legal regulations concerning electromagnetic compatibility of renewable energy sources are consistent throughout the entire European Union.