The development of many intelligent technologies, such as artificial intelligence and the Internet of Things, has brought new opportunities for water industry intelligence. Based on intelligent pressure regulation technology, this paper built an intelligent management platform, designed an intelligent pressure-regulating device, and combined both to form an intelligent pressure-regulating vehicle (IPRV). The IPRV has the functions of developing a pressure-regulating scheme, equipment selection, pressure reduction potential analysis, etc. It can bring convenience to the field test of the water supply network. In the field test, an intelligent pressure-regulating device was used to obtain the network data in the pilot site called S-cell. After utilizing the intelligent management platform to analyze the measured data, the water usage pattern and pressure reduction potential of the S-cell were obtained, and an optimal pressure-regulating strategy was formulated. The water pressure at the critical node always met the water demand at the critical node during the field test. In addition, no complaints were received from other users. The results show that the IPRV is not only convenient for utility managers to make decisions on building pressure-reducing stations, but also meets user needs, realizing a win–win situation for both users and companies.
As a common method to control leakage of water distribution system, pressure management has the advantages of reducing energy consumption, reducing the possibility of explosion and avoiding the aggravation of leakage. In recent years, with the popularization of plastic pipe in the world, it is necessary to study its leakage characteristic. Our research group carried out leakage experiments on high density polyethylene (HDPE) pipe, and found that the correlation curve between leakage flow and pressure did not completely coincide in the phase of pressure boost and pressure reduction. The existing FAVAD and exponential leakage models could not explain this phenomenon, which challenges the pressure management theory dominated by a single depressing-pressure process, thus it’s necessary to explore pressure management strategies suitable for plastic pipes. Based on the viscoelastic properties of plastic pipe, we established the viscoelastic leakage model and proposed the leakage control method of drop-restore pressure, and verified its feasibility in practical engineering case. The main research objectives of this paper will be firstly to describe the strain response of leakage area in the process of continuous stress application with the Boltzmann superposition principle for HDPE pipe; the Voigt-Kelvin model is used to simulate the creep behavior of viscoelastic material, and a suitable leakage model for viscoelastic pipe is proposed to provide accurate expression of the leakage under the regulation of drop-restore pressure. Secondly, the viscoelastic pipe leakage model is embedded into the pressure-driven analysis model based on non-iterative method, and the pressure-driven viscoelastic leakage model is obtained. Finally, evaluating the proposed leakage model in the practical case. With the minimum of leakage flow as the objective function, the leakage control model of drop-restore pressure is established and solved by particle swarm optimization algorithm to obtain the accurate pressure regulation scheme. After applying the scheme from the optimization, the leakage rate decreases from 37.7% to 16.8% on weekday, which is great impact on leakage control.
Improving the accuracy of Water Distribution Network (WDN) water quality models presents a significant challenge, particularly due to the incomplete mixing phenomena at internal junctions. In this study, CFD numerical simulations were conducted to identify key factors affecting solute mixing at cross, double-T, and H junctions. It was found that the inlet and outlet Reynolds number ratios significantly impact mixing efficiency at all three types of junctions, with the spacing at double-T junctions being particularly critical. An incomplete mixing model was developed based on the Response Surface Methodology (RSM). By integrating the RSM-based Incomplete Mixing Model (RSM-IMM) into EPANET or similar hydraulic and water quality modeling software, engineers and researchers can improve predictions of water quality parameters, thereby making more informed decisions in the management and operation of WDNs.
This study investigates novel methods for estimating metering errors in water meters, crucial for effectively managing apparent losses in Water Distribution Networks. Laboratory experiments were conducted to analyze the impact of various factors on metering errors. The Gene Expression Programming (GEP) algorithm was used to create a metering error assessment model, which was then validated through field trials in a DMA. Results indicate that metering errors are influenced by factors such as installation position, tilt angle, flow rates, and operational time. The GEP-based model showed high accuracy, with a mean squared error as low as 0.08, and a mere +0.5% difference from actual field measurements. This model offers water utility companies a cost-effective tool to assess metering errors without disassembly, offering a cost-effective tool for enhancing water supply management.
In this study, the efficacy of varying spoiler design parameters on regulating dead-end contaminant diffusion was investigated using particle image velocimetry (PIV) technology. The optimal spoiler design parameters were identified under low Reynolds number turbulence, including variables such as tilt angle, height, width, and installation position. The findings of this study present a novel approach for improving water quality in WDNs by installing spoilers in dead-ends while offering valuable insights and providing guidance for the design and optimization of these spoilers.