Yang Pan

Dr. Yang Pan


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2021 in PeerJ Computer Science
Verified
Journal Article
Open access
PDF file
WYWei Yan
Wei Yan
YPYang Pan
Yang Pan
JCJunjie Che
Junjie Che
JYJiexian Yu
Jiexian Yu
ZHZhuchen Han
Zhuchen Han
Dynamic locomotion plays a crucial role for legged robots to fulfill tasks in unstructured environments. This paper proposes whole-body kinematic and dynamic modeling method s based on screw theory for a quadruped robot using different gaits and mechanism topologies. Unlike simplified models such as centroid or inverse pendulum models, the methods proposed here can handle 10-dimensional mass and inertia for each part. The only simplification is that foot contact models are treated as spherical joints. Models of three different mechanism topologies are formulated: (1) Standing phase: a system consisting of one end-effector, the body, and four limbs, the legs; (2) Walking phase: a system consisting of one or two lifting legs (depending on the chosen gait), two or three supporting legs; (3) Floating phase: a system in which all legs detach from the ground. Control strategies based on our models are also introduced, which includes walk and trot gait plans. In our control system, two additional types of information are provided: (1) contacting forces are given by force sensors installed under feet; (2) body poses are determined by an inertial measurement unit (IMU). Combined with the sensor data and calibrated mass, inertia, and friction, the joint torque can be estimated accurately in simulation and experiment. Our prototype, the “XiLing” robot, is built to verify the methods proposed in this paper, and the results show that the models can be solved quickly and leads to steady locomotions.

12 April 2023 in Actuators
Verified
Journal Article
Open access
PDF file
ZHZhao Hong
Zhao Hong
KWKe Wen
Ke Wen
TLTianjian Lei
Tianjian Lei
YXYi'nan Xiao
Yi'nan Xiao
YPYang Pan
Yang Pan
In this paper, we propose a novel method for planning grinding trajectories on curved surfaces to improve the grinding efficiency of large aluminum alloy surfaces with welds and defect areas. Our method consists of three parts. Firstly, we introduce a deficiency positioning method based on a two-dimensional image and three-dimensional point cloud, which enables us to accurately and quickly locate the three-dimensional defective areas. Secondly, we propose a 2D weld positioning method based on the defect area and obtain the spatial position of the 3D weld by combining the relationship between 2D and 3D images. Additionally, we propose an orthogonal projection method from the point cloud to the aluminum alloy surface to calculate the weld reinforcement. Thirdly, we present a space spiral grinding trajectory planning method for complex curved surfaces based on the characteristics of the weld reinforcement, spatial position, and spatial position information of the defect area. This method shortens the grinding time of the defect area and improves efficiency. Simulation and experimental results show that our grinding trajectory planning method is more efficient than other grinding methods in removing defects from the surface of aluminum alloys. Moreover, the defect area after grinding is smoother than before.

2 March 2022 in Actuators
Verified
Journal Article
Open access
PDF file
JCJunjie Che
Junjie Che
YPYang Pan
Yang Pan
WYWei Yan
Wei Yan
JYJiexian Yu
Jiexian Yu
The leg structure with high dynamic stability can make the bionic biped robot have the inherent conditions to perform elastic and highly dynamic motion. Compared with the quadruped robot, the leg structure of the biped robot is more complex and has more degrees of freedom. This also complicates kinematic and dynamic modeling. In this paper, the kinematics model of a bionic biped robot is established. The leg configuration of the robot is a series parallel hybrid mechanism with five active joints and six passive joints. The mechanism is a spring mass model that interacts organically with the environment and mimics the characteristics of human walking well. By analyzing the topological configuration of leg mechanism, we use the screw theory to establish the forward and inverse kinematics models. Then, we build the prototype, and use a step gait to test the model and prototype. The research of this paper has obvious application significance for the design and iteration of biped robot prototype.

27 September 2023 in Mechanism and Machine Theory
Verified
Journal Article
Closed access
JCJunpeng Chen
Junpeng Chen
YPYang Pan
Yang Pan
JYJiexian Yu
Jiexian Yu
HFHuijuan Feng
Huijuan Feng
Jian S DaiJian S Dai
Jian S Dai

15 March 2022 in PeerJ Computer Science
Verified
Journal Article
Open access
PDF file
YWYucong Wu
Yucong Wu
YPYang Pan
Yang Pan
XLXiaokun Leng
Xiaokun Leng
ZHZhicheng He
Zhicheng He
Human-like features, like toe-off, heel-strike can enhance the performance of bipedal robots. However, few studies have considered the anthropomorphism of walking planning. Fewer studies have achieved their toe-off, heel-strike gait planning framework in a child-sized humanoid robot platform. This paper presents a human-like walking control framework based on the Divergent Component of Motion (DCM) com planning method that enables a child-sized humanoid robot to walk with a humanoid pattern with a speed of 0.6 s per step a strike of 30 cm. The control framework consists of three parts: the human-like gait generation of the center of mass (CoM) and swings foot trajectory, the dynamic replan in phase switch and the upper body stabilization controller. The dynamic replanning of the CoM and foot trajectory can efficiently decrease the vibration in the step-phase switch. The up-body stabilization controller can reduce the up-body swing in walking and increase the robot's stability while walking. The robot uses a mems-based inertial measurement unit (IMU) and joint position encoders to estimate the current state of the robot and use force-sensitive resistors (FSR) on the robot foot to identify the actual step phase of the robot. None of these solutions is high-cost or difficult to integrate with a child-size robot. Software simulations and walking experiments are using to verify the motion control algorithm. The effectiveness of the pattern generation and the controller can realize more human-like walking styles in a child-size robot are confirmed.

28 January 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YXYi'nan Xiao
Yi'nan Xiao
KWKe Wen
Ke Wen
YQYuanju Qu
Yuanju Qu
YMYanxi Mao
Yanxi Mao
YPYang Pan
Yang Pan
Small-batch workpieces in smart manufacturing demand process parameter modeling, but existing models lack analysis across varying sample sizes and runtime conditions. This study proposes a novel surface-roughness prediction method, Response Surface Methodology-BP Neural Network (RSM-BPNN), designed for experimental data from single small-batch workpieces with varying sample sizes. First, polynomial feature transformation and selection are performed based on the proposed process parameters to improve the feature quality of input data. Second, a Dynamic Central Composite Design-Response Surface Methodology (DCCD-RSM) determines the optimal experimental region and fits surface roughness, while a BPNN trains a deep learning model for prediction. The BPNN fusion method combines both approaches to create a general, adaptive predictive model for surface roughness. Finally, the accuracy and practicality of the BPNN model were verified through reverse calculation and parameter optimization in actual robot grinding experiments. The model demonstrated good predictive performance for surface roughness in aluminum alloy grinding, providing reliable guidance for surface quality prediction and process parameter optimization in small-batch workpieces within the context of smart manufacturing.