Purpose: The purpose of this paper is to investigate the anisotropic characteristics of the special structure of a columnar jointed rock masses and provide reference to forecast the behavioral characteristics of real samples. Design/methodology/approach: This study used FLAC3D numerical software to simulate the mechanical behavior of columnar jointed rock masses with different columns angles (ß) under different stress conditions. The peak strength, elastic modulus and Poisson’s ratio were obtained to investigate the strength, deformation characteristics and failure modes of the rock masses under conventional and true triaxial compression. Findings: The results showed that the compressive strength of the specimens presents a U-shape under different joint inclinations. The strength of the specimens reaches a maximum value when ß = 90°, and the value for ß = 0° is slightly lower and reaches a minimum value when ß = 50°. The elastic modulus and Poisson’s ratio of the samples are obviously anisotropic, the anisotropic coefficient decreases with increasing confining pressure. When σ₂ ≠ σ₃, the peak strengths of the samples are related to the direction of the minor principal stress, and the failure modes of the samples are related to the confining pressure and joint inclination. Originality/value: The present paper uses a numerical simulation method to examine the strength and deformation characteristics of a columnar jointed rock mass under conventional and true triaxial compression. The aim is to provide a reference to forecast the mechanical characteristics of test samples in the laboratory.

Representative volume element (RVE) is an important parameter in numerical tests of mechanical properties of heterogeneous geomaterials. For this study, a digital image processing (DIP) technology was proposed for estimating the RVE of heterogeneous geomaterials. A color image of soil and rock mixture (SRM) with size of 400 × 400 mm² taken from a large landslide was used to illustrate the determination procedure of the SRM. Six sample sizes ranging from 40 × 40 mm² to 240 × 240 mm² were investigated, and twelve random samples were taken from the binarized image for each sample size. A connected-component labeling algorithm was introduced to identify the microstructure. After establishing the numerical finite difference models of the samples, a set of numerical triaxial tests under different confining pressures were carried out. Results show that the size of SRM sample affects the estimation of the mechanical properties, including compressive strength, cohesion, and internal friction angle. The larger the size of the samples, the less variability of the estimated mechanical properties. The coefficient of variation (CV) was applied to measure the variability of mechanical properties, and the RVE of the SRM was determined easily with a predefined acceptance threshold of the CV. The results show that a DIP-based modeling method is an effective method got the RVE determination of heterogeneous geomaterials.

Editorial: Microscopic structure effect on the macroscopic property of geomaterials