This paper provides an overview of recent results of a design, development and performance evaluation study of satellite gateways to receive and manage the traffic from a large population of uncoordinated user terminals. In particular, direct satellite access scenarios for machine-to-machine communications and the Internet of Things have been targeted. Tests were carried out in a representative laboratory environment emulating realistic system scenarios. Performance results, as presented in this paper indicate that the proposed gateway architecture, based on an efficient access protocol, is capable of managing a very high number of uncoordinated terminals transmitting short messages with a low duty cycle. The applicability of the proposed solution to both geostationary and non-geostationary satellite systems has also been examined. The key concept of the gateway is based on a novel receiver architecture that implements the linear minimum mean square error (MMSE) spread spectrum signal detection and successive interference cancellation techniques. The receiver uses features such as a multi-stage detector together with a robust preamble detection. The end-to-end solution includes also the use of a new waveform with a quasi-constant envelope at the terminal to modulate and transmit data packets to be received and detected by the gateway via a satellite link.
In this chapter, the concepts and benefits of beam-hopping were presented along with some detection performance considerations. In particular, the gains in user satisfaction and system usable throughput were compared to that of a conventional broadband satellite system with a static coverage. Complementing the beam-hopping system principles, we discussed the physical layer transmission solutions suitable for beamhopping. Based on the identified waveform key-requirements for applying beamhopping, the already released DVB-S2X standard was reviewed and analysed using practical and representative system examples. It was found that the super-framing specification offers high practical relevance compared to the conventional DVBS2/S2X framing. The author also presented actual and future technology for a beam-hopping systems. Specifically, the upcoming Eutelsat Quantum-class satellite designed for beamhopping was presented along with its features like re-configurable beam-forming and highlights potential applications. The corresponding ground equipment was also discussed exploiting the advantages of wideband processing. Furthermore, implementation feasibility has been demonstrated by means of detection performance results exploiting DVB-S2X SF Format 4. Beam-hopping offers flexible system architecture to address changing traffic demands over time and geographical locations by sharing in time, power and frequency resources among multiple beams. Beam-hopping systems offer higher usable throughput by focusing the system resources where they are most needed at a time.
26 December 2022 in International Journal of Satellite Communications and Networking