Sparse arrays have grating lobes in the far field pattern due to the large spacing of elements residing in a rectangular or triangular grid. Random element spacing removes the grating lobes but produces large variations in element density across the aperture. In fact, some areas are so dense that the elements overlap. This paper introduces a low discrepancy sequence (LDS) for generating the element locations in sparse planar arrays without grating lobes. This nonrandom alternative finds an element layout that reduces the grating lobes while keeping the elements far enough apart for practical construction. Our studies consider uniform sparse LDS arrays with 86% less elements than a fully populated array, and numerical results are presented that show these sampling techniques are capable of completely removing the grating lobes of sparse arrays. We present the mathematical formulation for implementing an LDS generated element lattice for sparse planar arrays, and present numerical results on their performance. Multiple array configurations are studied, and we show that these LDS techniques are not impacted by the type/shape of the planar array. Moreover, in comparison between the LDS techniques, we show that the Poisson disk sampling technique outperforms all other approaches and is the recommended LDS technique for sparse arrays.
Digital beamforming is the holy grail of antenna array technologies, however implementing digital beamforming into practical antenna arrays has been slow due to hardware complexity and cost. We propose a relatively inexpensive new approach to digital beamforming using software defined radios. Using this system, we carried out experiments on adaptive interference cancellation. We present detailed description of the beamformer system along with the developed control software and experimentally verify the beamformer performance. Our results show that in high-interference and high-multipath environments, where carrier frequency offsets cannot be measured, conventional interference cancellation algorithms fail. We propose two new robust solutions to this problem and compare the results with multiple techniques, including the minimum variance distortionless response beamformer, which outputs the highest possible signal-to-interference-plus-noise-ratio (SINR). We experimentally demonstrate that both our approaches work well in the face of these types of signal corruptions and are capable of interference cancellation without degrading SINR or other system performance factors, and without the need for transmitter and receiver synchronization.
21 October 2020 in IEEE Antennas and Wireless Propagation Letters
The rapid increase in the number of wireless devices in modern communication networks has significantly increased the number of interference sources, which severely impacts communication reliability. Adaptive interference cancellation is rapidly becoming a necessity for modern wireless networks. For interference cancellation, a digital beamformer adaptively adjusts its weight vector using an array processing algorithm. This in turn shapes the radiation pattern in a manner that minimizes interference power and maximizes the desired signal power. In this work, we propose two atomic norm minimization based methods to design a weight vector that can be used to cancel interference. We present numerical and experimental studies and compare with the minimum variance distortionless response (MVDR) beamformer, which outputs the highest possible signal-to-interference-plus-noise-ratio (SINR). We show that our approach is robust to signal corruptions arising from carrier frequency offsets. Uniquely, our algorithm extracts the offset frequencies, thus enabling interference cancellation with maximum SINR.
13 December 2023 in IEEE Antennas and Propagation Magazine