An automatically power-stabilized (with power fluctuation < 0.155 dB), narrow-linewidth (0.0171 nm), wavelength-tunable (10.69 nm) erbium-doped fiber laser has been proposed by cascading two fiber Mach-Zehnder interferometers (MZI) without using any temperature controlling device. One of the MZIs (here called the 1st MZI) is composed of two 3 dB couplers to form interference patterns while the other MZI (here termed the 2nd MZI) is constructed with a tapered seven-core fiber (SCF) and based on the principle of supermode interference. For the two MZIs, the free spectral range (FSR), the passband bandwidth and the extinction ratio (ER) at 1560 nm are 0.37 nm, 0.19 nm, 16.6 dB and 13.93 nm, 7.93 nm, 10.1 dB, respectively. Due to the major difference between the two FSR values, the 1st MZI and the 2nd MZI respectively play a role in controlling the laser linewidth and suppressing the homogeneous broadening effect to reach to a satisfactory level of power stability. The 2nd MZI is also used to fine tune the laser wavelength by applying strain to the tapered SCF (TSCF) over the spectral range of 1570.22 - 1559.33 nm, with an incremental step of 0.37 nm being used. The side-mode suppression ratio (SMSR) of the tunable fiber laser can be up to 45 dB. By appropriately adjusting the polarization controller, dual wavelength lasing can also be achieved. For single wavelength lasing, the 3 dB laser linewidth is 0.0171 nm. The power fluctuation, without a temperature controlling device being used and operating at room temperature, is found to be less than 0.155 dB over 1 hour while the central wavelength drift is less than 0.19 nm.

A differential gain-dependent phase shift between the core mode and the cladding mode can be all-optically tuned by a cw $975\mathrm{nm}$ pump light for Mach–Zehnder interferometers using two abrupt fiber tapers in a 1.2-cm-long highly Er/Yb codoped fiber. The highly doped fiber has large absorption and emission cross sections to efficiently introduce the phase shift when the inversion rate is changed by varying the pump power. The first abrupt taper converts part of core mode into the cladding mode, while the second abrupt taper recombines both modes to interfere after propagating for a length of a few millimeters.

We demonstrate the optical measurements of heart-beat pulse rate and also elasticity of a polymeric tube, using a tapered fiber Mach-Zehnder interferometer. This device has two abrupt tapers in the Er/Yb codoped fiber and thus fractional amount of core mode is converted into cladding modes at the first abrupt taper. The core and cladding modes propagate through different optical paths and meet again at the second abrupt taper to produce interferences. The mechanical vibration signals generated by the blood vessels and by an inflated polymeric tube can perturb the optical paths of resonant modes to move around the resonant wavelengths. Thus, the cw laser signal is modulated to become pulses to reflect the heart-beat pulse rate and the elasticity of a polymeric tube, respectively.

We demonstrate a high-sensitivity broadband ($1250–1650\mathrm{nm}$) fiber micro-Michelson interferometer using a single-mode fiber end-spliced with a sphered-end hollow-core fiber. The hollow core is slightly smaller than the solid core of a single-mode fiber, so the fractional power of the core mode is converted into cladding modes. The excited cladding modes propagate at distinct optical paths along the hollow-core fiber and have individual foci outside the spherical lens. The reflected core mode, generated at the solid core–air interface, and the reflected cladding modes, generated at external material, interfere with each other to produce beating in the interference signals.