The research presented herein develops and compares an ADCIRC and ADCIRC/HEC-RAS (1D) paired model for the purpose of compound flood modeling within the Tar River and Pamlico Sound basins of North Carolina. Both the ADCIRC and 1D HEC-RAS models are capable of simulating river systems but differ in their underlying numerical formulations. A case-study comparison of each model’s ability to simulate flooding accurately and quickly in a riverine/estuarine system is investigated herein; results may serve as a valuable reference to forecasters and model developers. Individual models of the Tar River and Pamlico Sound area in North Carolina were used, and pairings of these models were devised to determine the benefits and drawbacks of using ADCIRC alone, or ADCIRC + 1D HEC-RAS, to simulate the response of the Tar River and Pamlico Sound during three test events: Hurricane Irene, Hurricane Floyd, and an unnamed April 2003 event. With increased emphasis on predicting total water levels, the results of this study can provide information for the possible development of similarly paired models for coastal river systems across the US and improve the body of knowledge about each model’s relative performance in riverine and estuarine areas.
This research details the development and validation of an updated constituent tidal database for the Western North Atlantic, Caribbean and Gulf of Mexico (WNAT) region, referred to as the EC2015 database. Regional databases, such as EC2015, provide much higher resolution than global databases allowing users to more accurately define the tidal forcing on smaller sub-region domains. The database last underwent major updates in 2001 and was developed using the two-dimensional, depth-integrated form of the coastal hydrodynamic model, ADvanced CIRCulation (ADCIRC), which solves the shallow-water equations in the generalized wave continuity equation form. Six main areas of improvement are examined: (1) placement of the open ocean boundary; (2) higher coastal resolution using Vertical Datum (VDatum) models; (3) updated bathymetry from global databases; (4) updated boundary forcing compared using two global tidal databases; (5) updated bottom friction formulations; and (6) improved model physics by incorporating the advective terms in ADCIRC. The skill of the improved database is compared to that of its predecessor and is calculated using harmonic data from the National Oceanic and Atmospheric Administration Center for Operational Oceanographic Products and Services (NOAA CO-OPS) stations and historic International Hydrographic Organization (IHO) data. Overall, the EC2015 database significantly reduces errors realized in the EC2001 database and improves the quality of coastal tidal constituents available for smaller sub-regional models in the Western North Atlantic, Caribbean and Gulf of Mexico (WNAT) region.
During tropical storms, precipitation and associated rainfall-runoff can lead to significant flooding, in both the upland and coastal areas. Flooding in coastal areas is compounded by the storm surge. Several hurricanes in recent history have exhibited the destructive force of compound flooding due to precipitation, rainfall-runoff, storm surge and waves. In previous work, various coupled modeling systems have been developed to model total water levels (defined as tides, waves, surge, and rainfall-runoff) for tropical storms. The existing coupled system utilizes a hydrologic model in the upland areas of the domain to capture the precipitation and rainfall-runoff associated with the storms; however, in the coastal areas the precipitation and rainfall-runoff is not captured. Herein a source/sink term is incorporated within the hydrodynamic model itself to capture precipitation and rainfall-runoff over the already inundated coastal areas. The new algorithm is verified for several idealized test cases, and then it is applied to Hurricane Irene. Validation indicates that the new methodology is comparable to the existing river flux forcing under most conditions and allows for the addition of streamflows due to overland runoff, as well as the actual precipitation itself.
With a growing population (over 40%) living in coastal counties within the U.S., there is an increasing risk that coastal communities will be significantly impacted by riverine/coastal flooding and high winds associated with tropical cyclones. Climate change could exacerbate these risks; thus, it would be prudent for coastal communities to plan for resilience in the face of these uncertainties. In order to address all of these risks, a coupled physics-based modeling system has been developed that simulates total water levels. This system uses parametric models for both rainfall and wind, which only require essential information (e.g., track and central pressure) generated by a hurricane model. The system is validated with Hurricane Isabel hindcasts: One using the parametric system and another using data assimilated fields. The results show a good agreement to the available data, indicating that the system is able to adequately capture the hazards using parametric models, as compared to optimized fields. The validated system was then utilized to simulate randomly generated scenarios that account for future uncertainty, i.e., amount of sea level rise and storm strength/track, as influenced by projected climate change scenarios. Results are then used in next step in the development of a system-wide, community resilience model.
This research details the development and validation of the updated Eastern North Pacific (ENPAC) constituent tidal database, referred to as ENPAC15. The database was last updated in 2003 and was developed using the two-dimensional, depth integrated form of the ADvanced CIRCulation coastal hydrodynamic model, ADCIRC. Regional databases, such as ENPAC15, are capable of providing higher resolution near the coast, allowing users to more accurately define tidal forcing for smaller sub-regions. This study follows the same methodology as the EC2015 updates for the eastern coast of the United States and six main areas of improvement in the modeling configurations are examined: (1) placement of the open ocean boundary; (2) higher coastal resolution; (3) updated global bathymetry; (4) updated boundary forcing using two global tidal databases; (5) updated bottom friction formulations; and (6) improved model physics by incorporating the advective terms in ADCIRC. The skill of the improved database is compared to that of its predecessor and is calculated using harmonic data from three sources. Overall, the ENPAC15 database significantly (52% globally) reduces errors in the ENPAC03 database and improves the quality of tidal constituents available for sub-regional models in the ENPAC region.
To accurately capture the fluid dynamics present in shallow straits and near-coastal zones, development efforts have centered around enhancing the 3D baroclinic capabilities of the coastal model, ADCIRC. The scale of resolution necessary to resolve shallow straits and coastal zones is not practical with structured global/regional models, such as HYCOM. However, ADCIRC utilizes an unstructured grid, which can capture complicated topography and coastal fluid dynamics. Typically, the barotropic ADCIRC domain encompasses large portions of the ocean; however, in baroclinic simulations, we restrict the domain to the region of interest due to computational demands. Consequentially, the open boundary is placed in an area dominated by complex, nonlinear processes, so proper specification of the open boundary conditions is difficult. Hence, one solution is coupling the offshore conditions provided from HYCOM to the near-coastal model, ADCIRC. This paper examines the coupling protocol needed to interface ADCIRC and HYCOM and provides preliminary results.