In this research paper, the relationship between a crossflow turbine and propeller turbine size changes and the pond size in a free vortex power generation system was investigated. This relationship can be written in the form of a new mathematical equation using the principles of the response surface methodology (RSM) method. This study aimed to compare the efficiency of a crossflow turbine and propeller turbine to enhance a micro power plant from free vortex. The pond size in a micro power plant from free vortex was 1 m in diameter and 0.5 m in height with a 0.2 m outlet drain at the bottom. All turbines were tested at different water flowrates of 0.2, 0.3, 0.4, 0.5, and 0.6 m³/s to identify the rpm, water head, voltage, and electric current to access the waterpower, power output, and overall efficiency. At a 0.02 m³/s water flowrate, the crossflow turbine had greater overall efficiency than the propeller turbine, reaching 9.09% efficiency. From the comparison of the results of the two turbines used in the 0.5 m high cylinder-shaped generator pond, the turbine type, turbine size (height and diameter), number of blades, and water flowrate are key factors that affect the overall efficiency. The crossflow turbine can achieve greater efficiency than the propeller turbine in this generator system.

This study aimed to present the experimental results of two types of turbines and attachments used in a hydro-compact generator. Two Horizontal Spiral Turbines (HSTs) with blade angles of eighteen and twenty-one degrees, respectively, and a three-blade turbine were tested and experimented in a laboratory at five levels of water flow rate ranging from 1–2 m/s. After the efficiency and torque values of each turbine were identified, they were installed in two 200 W power generator systems: (1) with a “diffuser” attachment; and (2) with an “in-line+diffuser+nozzle chamber” attachment, and tested in a local irrigation canal with 1.2 m/s. The results from the laboratory indicated that the HST with a twenty-one degree blade angle had 38.10% efficiency at the water flow rate of 2 m/s. It could reach 120.0 rpm and produced 212 Nm of torque. The results from the field experiment revealed that the combination of the power generator with the twenty-one degree blade angle HST and the in-line + diffuser + nozzle chamber attachment was the most efficient, with 284 Nm of torque at 108 rpm and could generate 67.63 W of electrical power. When the water flow rate of the irrigation canal reached 1.5 m/s, it could reach 114 rpm and generate 129.2 W. This hydro-compact generator set is suitable for irrigation canals with a water flow rate ranging from 1–1.5 m/s.