A general super-resolution reconstruction strategy was proposed for turbulent velocity fields using a generative adversarial network-based artificial intelligence framework. Two advanced neural networks, i.e., super-resolution generative adversarial network (SRGAN) and enhanced-SRGAN (ESRGAN), were first applied in fluid mechanics to augment the spatial resolution of turbulent flow. As a validation, the flow around a single-cylinder and a more complicated wake flow behind two side-by-side cylinders were experimentally measured using particle image velocimetry. The spatial resolution of the coarse flow field can be successfully augmented by 42 and 82 times with remarkable accuracy. The reconstruction performances of SRGAN and ESRGAN were comprehensively investigated and compared, including an analysis of the recovered instantaneous flow field, statistical flow quantities, and spatial correlations. The results convincingly demonstrated that both models can reconstruct the high-spatial-resolution flow field accurately even in an intricate flow configuration, and ESRGAN can provide a better reconstruction result than SRGAN in the mean and fluctuation flow field.
This paper focuses on the time-resolved turbulent flow reconstruction from discrete point measurements and non-time-resolved (non-TR) particle image velocimetry (PIV) measurements using an artificial intelligence framework based on long short-term memory (LSTM). To this end, an LSTM-based proper orthogonal decomposition (POD) model is proposed to establish the relationship between velocity signals and time-varying POD coefficients obtained from non-TR-PIV measurements. An inverted flag flow at Re = 6200 was experimentally measured using TR-PIV at a sampling rate of 2000 Hz for the construction of training and testing datasets and for validation. Two different time-step configurations were employed to investigate the robustness and learning ability of the LSTM-based POD model: a single-time-step structure and a multi-time-step structure. The results demonstrate that the LSTM-based POD model has great potential for time-series reconstruction since it can successfully recover the temporal revolution of POD coefficients with remarkable accuracy, even in high-order POD modes. The time-resolved flow fields can be reconstructed well using coefficients obtained from the proposed model. In addition, a relative error reconstruction analysis was conducted to compare the performance of different time-step configurations further, and the results demonstrated that the POD model with multi-time-step structure provided better reconstruction of the flow fields.
An experimental study is conducted to examine the impact of internal geometry of a fluidic oscillator on its working mechanisms, i.e., the widths of the inlet wedge W1, mixing chamber W2, and exit throat W3, normalized by the width of the inlet throat W0. Using time-resolved particle image velocimetry, the flow dynamics both inside and outside the oscillator are measured simultaneously. The phase-averaged flow fields are obtained using proper orthogonal decomposition analysis based on which the pressure fields are computed. It is found that the external jet spreading angle and the oscillation frequency are proportional to the width of the inlet wedge up to W1/W0 = 2. This is because the inlet wedge controls the feedback flow and accordingly the recirculation bubble in the mixing chamber. At a critical lower value of W1/W0 = 0.8, there is no feedback flow with a stable external sweeping jet. The mixing chamber width W2/W0 controls the size of the recirculation bubble, which has a notable proportional control on the spreading angle. With a small mixing chamber of W2/W0 = 2.9, it is also found that the strong feedback flow can still produce a stable sweeping jet motion but with a small spreading angle. The exit throat width W3/W0 has non-monotonous control on the external jet spreading angle and the oscillation frequency. It is noteworthy that the jet can still produce a stable sweeping motion even with a large value of W3/W0 = 4.2, which can significantly reduce the blocking effect of the exit.