With the rapid development of metal packaging, volatile organic compounds (VOCs) emissions from the packaging processes are also increasing gradually. It is necessary to research the characteristics of VOCs emissions from such important industrial source and its impact on the possible ozone formation. In this research, three typical metal packaging plants were selected, VOCs emission characteristics were investigated, and their ozone formation potential were evaluated by using maximum incremental reactivity (MIR) coefficient method. The results showed that the VOCs emission characteristics of the selected targets were obviously different. VOCs emitted from plant A and B were mainly oxygenated hydrocarbons, which accounted for 85.02% and 43.17%, respectively. Olefins (62.75%) were the main species of plant C. 2-butanone (82.67%), methylene chloride (23.00%) and ethylene (36.67%) were the major species of plant A, plant B and plant C, respectively. The OFP (ozone formation potential) value of plant B (120.49 mg/m³) was much higher than those values of plant A (643.05 mg/m³) and plant C (3311.73 mg/m³), in which para-xylene, meta-xylene, acetaldehyde and ethylene were the main contributors. The difference in OFP values indicated that water-based ink and water-based coatings should be recommended for large scale application due to less VOCs emission and low ozone formation contribution.

The VOC emission characteristics of the typical fiber-reinforced plastics (FRPs) industry were studied for an assessment of the impact on the environment. The results showed that the VOC emissions of the typical FRP industry mainly come from grille, sheet, winding, molding, and pultrusion process links, including ketones, aldehydes, alcohols, and benzene series. The benzene series’ concentration represented by styrene was much higher than that of other species. The generation potential of ozone and the SOA in the typical production process were evaluated: in terms of ozone impact, the OFP values of the winding process were the highest, accounting for 65.9% of the total contribution. For the component contribution, the OFP contribution of the benzene series represented by styrene was far more than that of other VOC species, and the styrene mainly came from the use of unsaturated resin. In terms of the SOA impact, the pultrusion process contributed the most to the generation of SOA, accounting for 63.9% of the total SOA contribution. In terms of the component contribution, the contribution of SOA mainly came from the benzene series, accounting for nearly 95% of the total contribution of VOCs. Therefore, FRP enterprises should give priority to controlling the emission of the benzene series.