Surrogate model (SM)-based optimization approaches have gained significant attention in recent years due to their ability to find optimal solutions faster than finite element (FE)-based methods. However, there is limited previous literature available on the detailed process of constructing SM-based approaches for multi-parameter, multi-objective design optimization of electric machines. This paper aims to present a systematic design optimization process for an interior permanent magnet synchronous machine (IPMSM), including a thorough examination of the construction of the SM and the adjustment of its parameters, which are crucial for reducing computation time. The performances of SM candidates such as Kriging, artificial neural networks (ANNs), and support vector regression (SVR) are analyzed, and it is found that Kriging exhibits relatively better performance. The hyperparameters of each SM are fine-tuned using Bayesian optimization to avoid manual and empirical tuning. In addition, the convergence criteria for determining the number of FE computations needed to construct an SM are discussed in detail. Finally, the validity of the proposed design process is verified by comparing the Pareto fronts obtained from the SM-based and conventional FE-based methods. The results show that the proposed procedure can significantly reduce the total computation time by approximately 93% without sacrificing accuracy compared to the conventional FE-based method.

Interior permanent magnet (IPM) machines with hairpin windings have attracted significant attention in EV applications owing to their low DC resistance and excellent thermal capabilities. In this paper, we present a comprehensive investigation of AC winding losses in IPM machines for traction applications, including analytical modeling, the influence of design parameters, and finite element (FE) verification. The proposed analytical model can predict the trends in AC winding losses for any number of bar conductors and slot/pole combinations. The results of the parametric study, obtained via the analytical model, are presented to examine the effects of key design parameters, such as conductor width and height, phase arrangement, and slot-per-pole-per-phase (SPP). To incorporate more practical issues into the analysis of IPM machines with hairpin windings, extensive FE simulations were conducted. The results indicated that the AC winding losses decrease with an increasing number of conductor layers and phases inside the slot.

The efficient design optimization of electric machines for electric power steering (EPS) applications poses challenges in meeting demanding performance criteria, including high power density, efficiency, and low vibration. Traditional optimization approaches often fail to find a global solution or suffer from excessive computation time. In response to the limitations of traditional approaches, this paper introduces a novel methodology by incorporating a Gaussian process-based adaptive sampling technique into a surrogate-assisted optimization process using a metaheuristic algorithm. Validation on a 72-slot/8-pole interior permanent magnet (IPM) machine demonstrates the superiority of the proposed approach, showcasing improved exploitation–exploration balance, faster convergence, and enhanced repeatability compared to conventional optimization methods. The proposed design process is then applied to two surface PM (SPM) machine configurations with 9-slot/6-pole and 12-slot/10-pole combinations for EPS applications. The results indicate that the 12-slot/10-pole SPM design surpasses the alternative design in torque density, efficiency, cogging torque, torque ripple, and manufacturability.