Hossein Eslamiat

Dr. Hossein Eslamiat

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2022 in Sensors
Verified
Journal Article
Open access
PDF file
UNUpesh Nepal
Upesh Nepal
HEHossein Eslamiat
Hossein Eslamiat
In-flight system failure is one of the major safety concerns in the operation of unmanned aerial vehicles (UAVs) in urban environments. To address this concern, a safety framework consisting of following three main tasks can be utilized: (1) Monitoring health of the UAV and detecting failures, (2) Finding potential safe landing spots in case a critical failure is detected in step 1, and (3) Steering the UAV to a safe landing spot found in step 2. In this paper, we specifically look at the second task, where we investigate the feasibility of utilizing object detection methods to spot safe landing spots in case the UAV suffers an in-flight failure. Particularly, we investigate different versions of the YOLO objection detection method and compare their performances for the specific application of detecting a safe landing location for a UAV that has suffered an in-flight failure. We compare the performance of YOLOv3, YOLOv4, and YOLOv5l while training them by a large aerial image dataset called DOTA in a Personal Computer (PC) and also a Companion Computer (CC). We plan to use the chosen algorithm on a CC that can be attached to a UAV, and the PC is used to verify the trends that we see between the algorithms on the CC. We confirm the feasibility of utilizing these algorithms for effective emergency landing spot detection and report their accuracy and speed for that specific application. Our investigation also shows that the YOLOv5l algorithm outperforms YOLOv4 and YOLOv3 in terms of accuracy of detection while maintaining a slightly slower inference speed.

12 August 2022 in Sensors
Verified
Journal Article
Open access
PDF file
JCJames Cabahug
James Cabahug
HEHossein Eslamiat
Hossein Eslamiat
We propose an unmanned aerial vehicle (UAV) failure detection system as the first step of a three-step autonomous emergency landing safety framework for UAVs. We showed the effectiveness and feasibility of using vibration data with the k-means clustering algorithm in detecting mid-flight UAV failures for that purpose. Specifically, we measured vibration signals for different faulty propeller cases during several test flights, utilizing a custom-made hardware system. After we made the vibration graphs and extracted the data, we investigated to determine the combination of acceleration and gyroscope parameters that results in the best accuracy of failure detection in quadcopter UAVs. Our investigations show that considering the gyroscope parameter in the vertical direction (gZ) along with the accelerometer parameter in the same direction (aZ) results in the highest accuracy of failure detection for the purpose of emergency landing of faulty UAVs, while ensuring a quick detection and timely engagement of the safety framework. Based on the parameter set (gZ-aZ), we then created scatter plots and confusion matrices, and applied the k-means clustering algorithm to the vibration dataset to classify the data into three health state clusters—normal, faulty, and failure. We confirm the effectiveness of the proposed system with flight experiments, in which we were able to detect faults and failures utilizing the aforementioned clusters in real time.

14 February 2025 in Drones
Verified
Journal Article
Open access
PDF file
MFMohsen Farajijalal
Mohsen Farajijalal
HEHossein Eslamiat
Hossein Eslamiat
VAVikrant Avineni
Vikrant Avineni
EHEric Hettel
Eric Hettel
Clark Aiden LindsayClark Aiden Lindsay
Clark Aiden Lindsay
The expanding use of civilian unmanned aerial vehicles (UAVs) has brought forth a crucial need to address the safety risks they pose in the event of failure, especially when flying in populated areas. This paper reviews recent advancements in recovery systems designed for the emergency landing of civilian UAVs. It covers a wide range of recovery methods, categorizing them based on different recovery approaches and UAV types, including multirotor and fixed-wing. The study highlights the diversity of recovery strategies, ranging from parachute and airbag systems to software-based methods and hybrid solutions. It emphasizes the importance of considering UAV-specific characteristics and operational environments when selecting appropriate safety systems. Furthermore, by comparing various emergency landing systems, this study reveals that integrating multiple approaches based on the UAV type and mission requirements can achieve broader cover of emergency situations compared to using a single system for a specific scenario. Examples of UAVs that utilize emergency landing systems are also provided. For each recovery system, three key parameters of operating altitude, flight speed and added weight are presented. Researchers and UAV developers can utilize this information to identify a suitable emergency landing method tailored to their mission requirements and available UAVs. Based on the key trends and challenges found in the literature, this review concludes by proposing specific, actionable recommendations. These recommendations are directed towards researchers, UAV developers, and regulatory bodies, and focus on enhancing the safety of civilian UAV operations through the improvement of emergency landing systems.

7 September 2022 in Electronics
Verified
Journal Article
Open access
PDF file
HEHossein Eslamiat
Hossein Eslamiat
NWNingshan Wang
Ningshan Wang
RHReza Hamrah
Reza Hamrah
ASAmit K Sanyal
Amit K Sanyal
This article proposes a novel integral geometric control attitude tracking scheme, utilizing a coordinate-free representation of attitude on the Lie group of rigid body rotations, SO(3). This scheme exhibits almost global asymptotic stability in tracking a reference attitude profile. The stability and robustness properties of this integral tracking control scheme are shown using Lyapunov stability analysis. A numerical simulation study, utilizing a Lie Group Variational Integrator (LGVI), verifies the stability of this tracking control scheme, as well as its robustness to a disturbance torque. In addition, a numerical comparison study shows the effectiveness of the proposed geometric integral term, when compared to other state-of-the-art attitude controllers. In addition, software-in-the-loop (SITL) simulations show the advantages of utilizing the proposed attitude controller in PX4 autopilot compared to using PX4’s original attitude controller.

30 July 2025 in IEEE Access
Verified
Journal Article
Open access
EHEric J. Hettel
Eric J. Hettel
HEHossein Eslamiat
Hossein Eslamiat
MAMohammed Aleemuddin
Mohammed Aleemuddin
Mohsen FarajijalalMohsen Farajijalal
Mohsen Farajijalal
In recent years, flying vehicles have become an innovative way to transfer parcels efficiently over a short distance. Existing airspace regulations are slow to adapt to the anticipated rise in aircraft traffic resulting from this development. This is because the increase in unmanned aerial vehicles (UAVs) comes with an increased risk of personal injuries from faulty drones carrying a payload. Many national regulatory agencies, such as the FAA, rely on the Abbreviated Injury Scale (AIS) to determine the weight threshold of a UAV by evaluating the impact energy and correlating it to the severity of a potential injury. This research paper presents a test apparatus to investigate the effect of different safety systems on AIS. As an example, a passive safety system in the form of a geodesic shell is used to investigate the change in impact acceleration and, therefore, the head injury sustained. The spherical shell is designed as a geodesic sphere. Its struts are carbon fiber reinforced polymer (CFRP) rods and connectors made from a flexible filament, TPU-95A. The apparatus enables droppings of the geodesic shell from a height of 4.48 meters, varying the payload weight in two weight classes between 2.5lb to 5lb attached to the drone. The impact acceleration is recorded, and the impact velocity is calculated using slow-motion video. The Head Injury Criterion (HIC) scale and the Abbreviated Injury Scale (AIS) are used to measure the predicted head injury level. The test apparatus designed establishes a standard of testing for other safety systems, in addition to geodesic shells like airbags, to be tested for their efficacy in reducing the head injury level sustained.

12 March 2026 in Drones
Verified
Journal Article
Open access
PDF file
BVBrady Kent Villiger
Brady Kent Villiger
HEHossein Eslamiat
Hossein Eslamiat
Significant advances in UAV subsystems, including flight control, communication, propulsion, and onboard energy storage, have accelerated interest in commercial UAV operations within civilian airspace. However, widespread deployment remains limited by unresolved safety concerns, particularly the risk posed by uncontrolled descent following in-flight failures. In such events, free-fall impact can result in severe damage to personnel and property underneath. This paper proposes a novel UAV safety system based on an autonomous chemically-inflated airbag designed to deploy during a rapid descent and attenuate impact forces. While prior UAV airbag systems have relied on compressed-gas canisters, the proposed chemically-actuated approach enables faster deployment and reduces volumetric integration requirements. Experimental testing demonstrates a reduction in impact force from 4638.8 N to 1562.76 N (approximately 66%), with airbag inflation occurring within a fraction of a second. Additionally, the added mass of the safety system remains within the payload capacity of the selected UAV platform. These results indicate that chemically-inflated airbag systems offer a promising solution for improving UAV safety and facilitating scalable civilian deployment.