Ground penetrating radar (GPR) is one of the most recommended tools for routine inspection of tunnel linings. However, the rebars in the reinforced concrete produce a strong shielding effect on the electromagnetic waves, which may hinder the interpretation of GPR data. In this work, we proposed a method to improve the identification of tunnel lining voids by designing a generative adversarial network-based rebar clutter elimination network (RCE-GAN). The designed network has two sets of generators and discriminators, and by introducing the cycle-consistency loss, the network is capable of learning high-level features between unpaired GPR images. In addition, an attention module and a dilation center part were designed in the network to improve the network performance. Validation of the proposed method was conducted on both synthetic and real-world GPR images, collected from the implementation of finite-difference time-domain (FDTD) simulations and a controlled physical model experiment, respectively. The results demonstrate that the proposed method is promising for its lower demand on the training dataset and the improvement in the identification of tunnel lining voids.
Ground penetrating radar (GPR) has been extensively used in the routine inspection of reinforced concrete structures. However, the signatures in GPR images are reflected electromagnetic waves rather than their actual shapes. The interpretation of GPR data is a mandatory but time- and labor-consuming task. Furthermore, the rebars in the near-surface of concrete cause clutter in the GPR images, which hinders the interpretation of GPR data. This work presents a deep learning network to invert GPR B-scan images to permittivity maps of subsurface structures. The proposed network has a multi-path encoder which enables the network to leverage three kinds of GPR data: the original, migrated, and encoder–decoder-processed GPR data. Each type of processing method is designed to serve a different purpose: the original GPR images retain all the waveforms; the migration method intensifies the vertices of the subsurface anomalies; the encoder–decoder network suppresses rebar clutter and enhances the visibility of the defect echoes. The outputs of three processing methods are jointly used to interpret GPR B-scan images. We demonstrated the superiority of the proposed network by comparing it with a network with a single-path encoder. We also validated the proposed network with synthetic and experimental GPR data. The results indicate that the proposed network effectively reconstructs the defects in the reinforced concrete.
28 November 2024 in IEEE Transactions on Geoscience and Remote Sensing
The use of deep learning to interpret ground penetrating radar (GPR) data for automated target detection has become a rapidly developing field. However, the performance of deep learning networks is significantly affected by the quantity and diversity of the available GPR data for training. The finite-difference time-domain (FDTD) method is commonly used to supplement datasets. However, there are considerable differences between FDTD-simulated and real GPR data, which limit the effectiveness of using FDTD data for training. To address these challenges, we propose a generative adversarial network (GAN)-based domain adaptation network for detecting target reflections in GPR data. This network combines the You Only Look Once (YOLO) network with a domain adaptation (DA) module, forming a GAN-based DA-YOLO that aligns features extracted from simulated and real GPR data to enhance the performance of the network on real GPR data. To further improve the network’s performance on real GPR data, a pseudo-labeling strategy is employed. This approach leverages the pseudo-labels generated by the network to iteratively refine and improve its accuracy. To validate the proposed method, we conduct comparative experiments to evaluate the impact of key factors, including network architecture, pseudo-labeling thresholds, and source-target domain discrepancies, on feature alignment and the improvement of detection performance for target domain data. The effectiveness of the proposed method is validated using real-world GPR data collected from a railway tunnel inspection. The results demonstrate that the proposed DA-YOLO network achieves the best detection performance on real data, with recall, precision, F1 score, and mAP values of 81.25%, 86.67%, 83.87%, and 69.30%, respectively, outperforming other networks that do not utilize domain adaptation methods. This study provides a solution for situations where real GPR data is scarce and only FDTD-simulated data can be used as training data.