During the deep fat food frying process, the frying media, oil, continuously degenerates when exposed to high temperature, oxygen and moisture. This leads to physical and chemical changes including the formation of hydrolysis products such as free fatty acids (FFAs) which are associated with undesirable darkening in colour, off-flavouring and a lowering of the smoke point. This study was aiming to develop a method capable of identifying and quantifying individual free fatty acids within oil using a small sample size (100 mg of oil). We used liquid/liquid extraction technique to separate FFAs from the rest of the oil followed by esterification using boron trifluoride (BF3) and then gas chromatography analysis. Various extraction conditions were tested. A mixture of 0.02 M phosphate buffer at pH 12 and acetonitrile at solvent: buffer ratio larger than 2:1 showed the highest efficiency in extraction of FFAs. The method was capable of producing accurate fatty acid profiles of FFAs and showed good precision on medium rancidity oil samples. It also captured the differences induced by adding free fatty acids to samples. An interesting discrepancy was found between the new method and the traditional titration method in terms of overall FFA content, which suggests further optimisation and investigation are required.
1 December 2018 in Trends in Food Science & Technology
Wheat is the major food grain consumed in temperate countries. Most wheat is consumed after milling to produce white flour, which corresponds to the endosperm storage tissue of the grain. Because the starchy endosperm accounts for about 80% of the grain dry weight, the miller aims to achieve flour yields approaching this value. Bioimaging can be combined with biochemical analysis of fractions produced by sequential pearling of whole grains to determine the distributions of components within the endosperm tissue. This reveals that endosperm is not homogeneous, but exhibits gradients in composition from the outer to the inner part. These include gradients in both amount and composition. For example, the content of gluten proteins decreases but the proportion of glutenin polymers increases from the outside to the centre of the tissue. However, the content of starch increases with changes in the granule size distribution, the proportions of amylose and amylopectin, and their thermal properties. Hence these parts of the endosperm differ in the functional properties for food processing. Gradients also exist in minor components which may affect health and processing, such as dietary fibre and lipids. The gradients in grain composition are reflected in differences in the compositions of the mill streams which are combined to give white flour (which may number over 20). These differences could therefore be exploited by millers and food processors to develop flours with compositions and properties for specific end uses.
28 November 2020 in Journal of Food Processing and Preservation
The global crises of plastic and food waste require innovative packaging solutions. This study examines pectin-based biodegradable films plasticised with glycerol and sorbitol as sustainable alternatives to conventional plastics. The films demonstrated significant variations in thickness, moisture content, mechanical strength, and colour based on the type of pectin (citrus or apple) and plasticiser used. Glycerol improved flexibility and moisture retention, while sorbitol decreased moisture and increased porosity. Thermal and SEM analyses showed unique transitions and smoother surfaces with glycerol. Citrus pectin films exhibited higher tensile strength and transparency than apple pectin films, owing to higher esterification. The combination of glycerol and citrus pectin produced films comparable to commercial products, indicating potential for food packaging and diminishing plastic waste. Future research should focus on optimising these films for practical applications.