We present an advanced differential synthetic aperture radar (SAR) interferometry (DInSAR) processing chain, based on the Parallel Small BAseline Subset (P-SBAS) technique, for the efficient generation of deformation time series from Sentinel-1 (S-1) interferometric wide (IW) swath SAR data sets. We first discuss an effective solution for the generation of high-quality interferograms, which properly accounts for the peculiarities of the terrain observation with progressive scans (TOPS) acquisition mode used to collect S-1 IW SAR data. These data characteristics are also properly accounted within the developed processing chain, taking full advantage from the burst partitioning. Indeed, such data structure represents a key element in the proposed P-SBAS implementation of the S-1 IW processing chain, whose migration into a cloud computing (CC) environment is also envisaged. An extensive experimental analysis, which allows us to assess the quality of the obtained interferometric products, is presented. To do this, we apply the developed S-1 IW P-SBAS processing chain to the overall archive acquired from descending orbits during the March 2015-April 2017 time span over the whole Italian territory, consisting in 2740 S-1 slices. In particular, the quality of the final results is assessed through a large-scale comparison with the GPS measurements relevant to nearly 500 stations. The mean standard deviation value of the differences between the DInSAR and the GPS time series (projected in the radar line of sight) is less than 0.5 cm, thus confirming the effectiveness of the implemented solution. Finally, a discussion about the performance achieved by migrating the developed processing chain within the Amazon Web Services CC environment is addressed, highlighting that a two-year data set relevant to a standard S-1 IW slice can be reliably processed in about 30 h.The presented results demonstrate the capability of the implemented P-SBAS approach to efficiently and effectively process large S-1 IW data sets relevant to extended portions of the earth surface, paving the way to the systematic generation of advanced DInSAR products to monitor ground displacements at a very wide spatial scale.

This paper presents a web tool for the unsupervised retrieval of Earth’s surface deformation from Synthetic Aperture Radar (SAR) satellite data. The system is based on the implementation of the Differential SAR Interferometry (DInSAR) algorithm referred to as Parallel Small BAseline Subset (P-SBAS) approach, within the Grid Processing on Demand (G-POD) environment that is a part of the ESA’s Geohazards Exploitation Platform (GEP). The developed on-demand web tool, which is specifically addressed to scientists that are non-expert in DInSAR data processing, permits to set up an efficient on-line P-SBAS processing service to produce surface deformation mean velocity maps and time series in an unsupervised manner. Such results are obtained by exploiting the available huge ERS and ENVISAT SAR data archives; moreover, the implementation of the Sentinel-1 P-SBAS processing chain is in a rather advanced status and first results are already available. Thanks to the adopted strategy to co-locate both DInSAR algorithms and computational resources close to the SAR data archives, as well as the provided capability to easily generate the DInSAR results, the presented web tool may contribute to drastically expand the user community exploiting the DInSAR products and methodologies.

We present in this work an advanced processing pipeline for continental scale differential synthetic aperture radar (DInSAR) deformation time series generation, which is based on the parallel small baseline subset (P-SBAS) approach and on the joint exploitation of Sentinel-1 (S-1) interferometric wide swath (IWS) SAR data, continuous global navigation satellite system (GNSS) position time-series, and cloud computing (CC) resources. We first briefly describe the basic rationale of the adopted P-SBAS processing approach, tailored to deal with S-1 IWS SAR data and to be implemented in a CC environment, highlighting the innovative solutions that have been introduced in the processing chain we present. They mainly consist in a series of procedures that properly exploit the available GNSS time series with the aim of identifying and filtering out possible residual atmospheric artifacts that may affect the DInSAR measurements. Moreover, significant efforts have been carried out to improve the P-SBAS processing pipeline automation and robustness, which represent crucial issues for interferometric continental scale analysis. Then, a massive experimental analysis is presented. In this case, we exploit: (i) the whole archive of S-1 IWS SAR images acquired over a large portion of Europe, from descending orbits, (ii) the continuous GNSS position time series provided by the Nevada Geodetic Laboratory at the University of Nevada, Reno, USA (UNR-NGL) available for the investigated area, and (iii) the ONDA platform, one of the Copernicus Data and Information Access Services (DIAS). The achieved results demonstrate the capability of the proposed solution to successfully retrieve the DInSAR time series relevant to such a huge area, opening new scenarios for the analysis and interpretation of these ground deformation measurements.

We present an automatic pipeline implemented within the Amazon Web Services (AWS) Cloud Computing platform for the interferometric processing of large Sentinel-1 (S1) SAR datasets, aimed at analyzing Earth surface deformation phenomena at wide spatial scale. The developed processing chain is based on the advanced DInSAR approach referred to as Small BAseline Subset (SBAS) technique, which allows producing, with centimeter to millimeter accuracy, surface deformation time series and the corresponding mean velocity maps from a temporal sequence of SAR images. The implemented solution addresses the aspects relevant to i) the S1 input data archiving; ii) the interferometric processing of S1 data sequences, performed in parallel on the AWS computing nodes through both multi-node and multi-core programming techniques; iii) the storage of the generated interferometric products. The experimental results are focused on a national scale DInSAR analysis performed over the whole Italian territory by processing 18 S1 slices acquired from descending orbits between March 2015 and April 2017, corresponding to 2612 S1 acquisitions. Our analysis clearly shows that an effective integration of advanced remote sensing methods and new ICT technologies can successfully contribute to deeply investigate the Earth System processes and to address new challenges within the Big Data EO scenario

In this study, we present the detection and characterization of ground displacements in the urban area of Pisa (Central Italy) using Interferometric Synthetic Aperture Radar (InSAR) products. Thirty RADARSAT-2 and twenty-nine COSMO-SkyMed images have been analyzed with the Small BAseline Subset (SBAS) algorithm, in order to quantify the ground subsidence and its temporal evolution in the three-year time interval from 2011 to 2014. A borehole database was reclassified in stratigraphical and geotechnical homogeneous units, providing the geological background needed for the local scale analysis of the recorded displacements. Moreover, the interferometric outputs were compared with the last 30 years’ urban evolution of selected parts of the city. Two deformation patterns were recorded by the InSAR data: very slow vertical movements within the defined stability threshold (±2.5 mm/yr) and areas with subsidence rates down to −5 to −7 mm/yr, associated with high peak velocities (−15 to −20 mm/yr) registered by single buildings or small groups of buildings. Some of these structures are used to demonstrate that the high subsidence rates are related to the recent urbanization, which is the trigger for the accelerated consolidation process of highly compressible layers. Finally, this urban area was a valuable test site for demonstrating the different results of the C- and X-band data processing, in terms of the density of points and the quality of the time series of deformation.

We present an automatic and unsupervised tool for the systematic generation of Sentinel-1 (S1) differential synthetic aperture radar interferometry (DInSAR) coseismic products. In particular, the tool first retrieves the location, depth, and magnitude of every seismic event from interoperable online earthquake catalogs (e.g., the United States Geological Survey (USGS) and the Italian National Institute of Geophysics and Volcanology (INGV) and then, for significant (with respect to a set of selected thresholds) earthquakes, it automatically triggers the downloading of S1 data and their interferometric processing over the area affected by the earthquake. The automatic system we developed has also been implemented within a Cloud-Computing (CC) environment, specifically the Amazon Web Services, with the aim of creating a global database of DInSAR S1 coseismic products, which consist of displacement maps and the associated wrapped interferograms and spatial coherences. This information will progressively be made freely available through the European Plate Observing System (EPOS) Research Infrastructure, thus providing the scientific community with a large catalog of DInSAR data that can be helpful for investigating the dynamics of surface deformation in the seismic zones around the Earth. The developed tool can also support national and local authorities during seismic crises by quickly providing information on the surface deformation induced by earthquakes.