The defects in the welds of energy pipelines have significantly influenced their safe operation. The inefficient and inaccurate detection of the defects may give rise to catastrophic accidents. Ultrasonic phased array inspection is an important means of ensuring pipeline safety. The total focusing method (TFM), using ultrasonic phased arrays, has become widely used in recent years in non-destructive evaluation (NDE). However, manual defect recognition of TFM images is seen to lack accuracy and robustness, arising from deficiency of practical experience. In this paper, the automated classification of different defects from TFM images is studied with a view to facilitate inspection efficacy. By experimentally implementing the TFM approach on a bespoke specimen, the images corresponding to crack-like defects and pore-like defects were employed to investigate the effectiveness of four different machine learning models (known as Support Vector Machine, CART Decision tree, K Nearest Neighbors, Naive Bayes) containing data augmentation, feature extraction and defect classification. The results suggested that the accuracy of defect classification using the HOG-Poly-SVM algorithm was 93%, which outperformed the results from other algorithms. The advantage of the HOG-Poly-SVM algorithm used in defect classification of ultrasonic phased array TFM data is discussed by conducting ten-fold cross validation and other evaluation metrics. In this paper, in order to improve the efficiency of detecting pipeline defects in the future, and for testing test blocks simulating buried pipelines containing defects, we proposed, for the first time, that ultrasonic phased-array TFM imaging results in small object detection images, and found that the SVM algorithm was applicable to ultrasonic phased array TFM imaging, providing a research method and ideas for the use of artificial intelligence in industrial non-destructive testing.

The ultrasonic detectability of buried defects within composite materials is dependent on the anisotropy of the composite material by which the propagation property of acoustic wave in each direction is variably affected. In this study, the characteristics of acoustic waves propagating in different directions for composite materials are explored based on the full matrix capture (FMC) data using an ultrasonic phased array. The elastic constant of multidirectional carbon fiber reinforced plastic (CFRP) laminate is first derived based on the genetic algorithm. The characteristics of transmitted and reflected waves in higher angles are predicted by implementing the Christoffel equation, and the focal law used in post-processing of FMC data can be optimized accordingly. The imaging results of the total focusing method (TFM) using the improved focal law are compared with the results of the conventional TFM. The results suggest that the optimized TFM can effectively characterize the defect by reducing the background noise. Furthermore, since it is impractical to theoretically correct angle-dependent velocity for in situ inspection, a linear extrapolation method based on the experimentally measurable velocity at low angles is proposed to estimate the velocity profile at higher angles. The imaging results using the fast extrapolated velocity profile is then compared with the theoretical, and it has been demonstrated that while the difference between the images using the theoretical focal law and the linearly extrapolated one is barely visible, the later one is overwhelmingly advantageous to be realiszd for engineering practices.

A diffuse acoustic field has been increasingly used to infer temporal changes in the structures, such as early dislocations and microcracking. This study explores three different techniques to characterise acoustic field by using a single ultrasonic phased array. The first two techniques are proposed to measure spatial uniformity of wave field by examining differences in the integral of energy and the maximum energy respectively at multiple inspection locations. The third one is developed to evaluate the degree of phase coherence between propagating waves transmitted sequentially by two neighbouring array elements. The efficacy of these techniques are investigated by examining their metrics on simulations and well-known samples. The results suggest that two selected metrics can be used to quantitatively estimate the diffuse field start time as well as the field size by comparing their value with the idealised diffuse state (15% for the energy integral metric, η _area and 1 for the phase coherence metric, η _phase ) and identifying the convergence start point.