Ionospheric delay is a critical error source in Global Navigation Satellite Systems (GNSSs) and a principal aspect of Satellite Based Augmentation System (SBAS) corrections. Grid Ionospheric Vertical Delays (GIVDs) are derived from the delays on Ionosphere Pierce Points (IPPs), which are observed by SBAS reference stations. SBAS master stations calculate ionospheric delay corrections by several methods, such as planar fit or Kriging. However, when there are not enough IPPs around an Ionosphere Grid Point (IGP) or the IPPs are unevenly distributed, the fitting accuracy of planar fit or Kriging is unsatisfactory. Moreover, the integrity bounds of Grid Ionospheric Vertical Errors (GIVEs) are overly conservative. Since Artificial Neural Networks (ANNs) are widely used in ionospheric research due to their self-adaptation, parallelism, non-linearity, robustness, and learnability, the ANN method for GIVD and GIVE derivation is proposed in this article. Networks are separately trained for IGPs, and five years of historical data are applied on network training. Principal Component Analysis (PCA) is applied for dimensionality reduction of geomagnetic and solar indices, which is employed as a network input feature. Furthermore, the GIVE algorithm of the ANN method is derived based on the distribution of the residual random variable. Finally, experiments are conducted on 12 IGPs over the East China region. Under normal ionospheric conditions, compared with the planar fit and Kriging methods, the residual reduction of the ANN method is approximately 15%. The ANN method fits the ionospheric delay residual error better. The percentage of GIVE availability under 2.7 m increases at least 25 points in comparison to Kriging. Under disturbed conditions, due to a lack of training samples, the ANN method is incompetent compared with planar fit or Kriging.
The Global Navigation Satellite System (GNSS) is generally combined with the Inertial Navigation System (INS) to deliver reliable and high-performance navigation, particularly in scenarios where GNSS signals may be compromised. This integration leverages the inherent strengths of both systems to ensure continuous and accurate positioning. To enhance the robustness and accuracy of navigation systems in challenging environments, this paper proposes a novel hybrid integration (HI) approach for GNSS/INS fusion. The system incorporates a Multiple State Inspection of GNSS Observations (MSI-GO) mechanism, which dynamically selects the optimal integration mode based on the number of visible satellites (NoS) and position dilution of precision (PDoP), thereby achieving a balance between positioning performance and computational efficiency. Simulation results using an open dataset demonstrate that, compared to traditional loosely coupled (LC) and tightly coupled (TC) methods, the HI scheme improves positioning accuracy by approximately while reducing computational complexity by around . This validates the proposed approach as both stable and resource-efficient, with strong applicability in real-world navigation scenarios.
Autonomous obstacle avoidance for UAVs in dynamic obstacle-dominated complex environments must address time-varying local collision risks from multiple directions under the constraints imposed by local sensing, environmental uncertainty, execution safety, and limited onboard computation. Planning-based methods often require frequent replanning or explicit obstacle prediction, whereas conventional reinforcement learning policies may produce myopic decisions under partial observability. To address these limitations, this study proposes a dynamic obstacle-avoidance framework that combines a temporal LiDAR representation with safety-aware action correction in recurrent reinforcement learning. Multi-layer LiDAR observations are constructed using sector-wise minimum pooling. Adjacent two-frame stacking and a CNN-LSTM architecture are then used to extract local geometric structures and short-term dynamic cues, and a velocity-control policy is optimized using Recurrent PPO. In addition, a smooth velocity-projection safety shield is introduced to modify policy outputs and reduce collision risk during both training and policy execution. Experiments conducted in mixed static–dynamic obstacle scenarios based on Gym-PyBullet-Drones show that the proposed method achieves an average success rate of 91.9% across four test configurations, with an average online computation time of 0.78 ms. Ablation studies further support the contributions of two-frame observations, LSTM-based temporal modeling, and the safety shield.