Laser shock peening (LSP) is a surface modification technique to improve the mechanical properties of metals and alloys, where physical phenomena are difficult to investigate, due to short time scales and extreme physical values. In this regard, simulations can significantly contribute to understand the underlying physics. In this paper, a coupled simulation approach for LSP is presented. A global model of laser–matter–plasma interaction is applied to determine the plasma pressure, which is used as surface loading in finite element (FE) simulations in order to predict residual stress (RS) profiles in the target material. The coupled model is applied to the LSP of AA2198-T3 with water confinement, square focus and 20 ns laser pulse duration. This investigation considers the variation in laser pulse energy (3 J and 5 J) and different protective coatings (none, aluminum and steel foil). A sensitivity analysis is conducted to evaluate the impact of parameter inaccuracies of the global model on the resulting RS. Adjustment of the global model to different laser pulse energies and coating materials allows us to compute the temporal pressure distributions to predict RS with FE simulations, which are in good agreement with the measurements.
3 February 2022 in IEEE Transactions on Plasma Science
Nowadays, advanced surface improvement techniques are required, due to continuously rising demands in aerospace and automotive productions. Laser shock peening (LSP) is a widely known modern surface enhancement method. LSP usually deals with nanosecond laser pulses with high intensities exceeding 1 GW/cm². Due to very short time scales, all the occurring physical phenomena and processing parameters are extremely difficult to measure and study just based on experimental investigations. Therefore, multidimensional computer simulations of the processes within LSP are required for further optimization. In this work, a 2-D hydrodynamic simulation of water-confined nanosecond laser shock peening of an aluminum target is performed applying the open-source code MULTI2D. Circular laser beam with a pulse energy of 1 J, 20-ns duration, a diameter of 1 mm, and a uniform spatial distribution is used. Spatial profiles of the laser-induced plasma pressure and temperature are determined together with the shock wave parameters. It is shown that the plasma is highly confined and a temperature-affected region is very thin. Radial expansion of the surface pressure profile and the shock wave propagation can be observed, indicating that radial effects have to be considered during the industrial application of LSP. The obtained results are in good agreement with available simulations and measurements, validating the proposed simulation approach. In addition, temporal and spatial distributions of the pressure at the surface of the target material can be applied in finite-element simulations to predict residual stresses distributions.