In this paper, we present a method to design a hybrid fuzzy logic controller (FLC) for a magnetic levitation system (MLS) based on the linear feedforward control method combined with FLC. MLS has many applications in industry, transportation, but the system is strongly nonlinear and unstable at equilibrium. The fast response linear control law ensures that the ball is kept at the desired point, but does not remain stable at that point in the presence of noise or deviation from the desired position. The controller that combines linear feedforward control and FLC is designed to ensure ball stability and increase the system's fast-response when deviating from equilibrium and improve control quality. Simulation results in the presence of noise show that the proposed control law has a fast and stable effect on external noise. The advantages of the proposed controller are shown through the comparison results with conventional PID and FLC control laws.
13 December 2024 in Control Systems and Optimization Letters
This paper aims to synthesize a synergetic control law using a cascade approach for trajectory-tracking robots. A nonlinear model was established for a differential two-wheeled mobile robot. The robot’s operation can either stabilize along a desired trajectory or deviate due to model uncertainty and external disturbances. The cascade approach is utilized to reduce system complexity while maintaining the robustness of the control law. The kinematic control law in the outer loop is designed using Lyapunov functions, while the dynamic control law is derived using synergetic control theory. This law ensures system control quality under model uncertainties and external disturbances. Finally, simulation results demonstrate that the proposed controller provides robust stability for the mobile robot, along with excellent disturbance rejection and robustness against model uncertainties.
1 February 2023 in Bulletin of Electrical Engineering and Informatics
This paper focuses on synthesizing sliding mode control (SMC) for flexible-joint manipulators (FJM) based on serial invariant manifolds in order to increase the control quality for the system. SMC based on the serial invariant manifolds is proposed. The control law is found based on synergetic control theory (SCT) and analytical design of aggregated regulators (ADAR) method. In order to improve the control quality due to the effect of the stiffness value between two links in the system, a mechanism for constructing manifolds is built. The time response of the outer loop manifolds close to the actuator will be larger in the next round. The control quality of the system can be pre-evaluated through the parameters of the designed manifolds. Global stability is demonstrated by using the Lyapunov function in the design process. Finally, the effectiveness of the proposed controller based on SCT is demonstrated by numerical simulation results and compared with the traditional SMC.
25 October 2023 in International Journal of Robotics and Control Systems
In this paper, the authors present a new method to synthesize an adaptive sliding controller for Twin Rotor MIMO System (TRMS) based on Synergetic Control Theory (SCT). This system represents a prototype of a helicopter with two degrees of freedom and is widely used in automatic control laboratories. The complexity of the control problem is due to the nonlinear cross-coupling between the main and tail rotors. Uncertainty in system parameters further increases the complexity of the control problem. In Synergetic Control Theory, manifolds are designed for each channel. The control law is found based on sequential manifolds and the Analytical Design of Aggregated Regulators (ADAR) method. The adaptive law when the parameters are uncertain is given based on the analysis of system stability thanks to the Lyapunov function of the first manifold. Finally, the effectiveness of the proposed controller is demonstrated by numerical simulation results and comparison with conventional Sliding Mode Control (SMC).
11 June 2025 in International Journal of Control, Automation, and Systems
In this study, a controller design method based on the LQR method and BAT algorithm is presented for the Furuta pendulum stabilization system. Determine the LQR controller, it is often based on the designer's experience or using trial and error to find the Q, R matrices. The BAT search algorithm is based on the characteristics of the bat population in the wild. However, there are advantages to finding multivariate objective functions. The BAT algorithm has an improvement for the LQR controller to optimize the linear square function with fast response time, low energy consumption, overshoot, and a small number of oscillations. Swarm optimization algorithms have advantages in finding global extrema of multivariate functions. Therefore, with a large number of elements of the Q and R matrices, they can also be quickly found and these matrices still satisfy the Riccati equation. The controller with optimal parameters is verified through simulation results with different scenarios. The performance of the proposed controller is compared with a conventional LQR controller and implemented on a real system.