A complete set of diverse haptic feedbacks is essential for a highly realistic and immersive virtual environment. In this sense, a multi-mode haptic interface that simultaneously generates multiple kinds of haptic signals is highly desirable. In this paper, we propose a new silicone-made pneumatically controlled fingertip actuator to render pressure and vibrotactile feedback concurrently to offer a realistic and effective haptic sensation. A new silicone-based stacked dual-layer air chamber was designed. The volume of the chambers is controlled by pneumatic valves with compressed air tanks. The top/upper air chamber renders vibration feedback, whereas the bottom/lower air chamber renders pressure feedback. The proposed silicone-made fingertip actuator is designed so that it can be easily worn at the fingertips. To demonstrate the potential of the system, a virtual environment for rendering three different types of haptic textures was implemented. Extensive performance evaluation and user studies were carried out to demonstrate the proposed actuator’s effectiveness compared to an actuator with single vibrotactile feedback.
30 March 2022 in IEEE Transactions on Intelligent Transportation Systems
Recently, there has been an excessive congestion occurring in the driving environment because of the presence of modern gadgets inside the car and increased traffic on the roads, which has resulted in a higher demand for the visual and cognitive senses. This prompted the need to reduce the demand to make driving experience safer and more comfortable. Consequently, a novel steering wheel design for in-car controls is presented in this paper. The new design introduces dual ubiquitous touch panels embedded in the steering wheel for interaction with in-car controls and haptic feedback as positive reinforcement upon successful execution of an in-car control. There are eight different functionalities that can be controlled using the embedded touch panels. The proposed system is compared with a standard car regarding its efficacy using the NASA task load index (NASA-TLX) evaluation technique. The results showed that the proposed system significantly reduced the drivers’ visual, cognitive, and manual workload.
A wide range of haptic feedback is crucial for achieving high realism and immersion in virtual environments. Therefore, a multi-modal haptic interface that provides various haptic signals simultaneously is highly beneficial. This paper introduces a novel silicone fingertip actuator that is pneumatically actuated, delivering a realistic and effective haptic experience by simultaneously providing pressure, vibrotactile, and cold thermal feedback. The actuator features a design with multiple air chambers, each with controllable volume achieved through pneumatic valves connected to compressed air tanks. The lower air chamber generates pressure feedback, while the upper chamber produces vibrotactile feedback. In addition, two lateral air nozzles utilize a vortex tube to generate a cold thermal sensation. To showcase the system's capabilities, we designed two unique 3D surfaces in the virtual environment: a frozen meat surface and an abrasive icy surface. These surfaces simulate tactile perceptions of coldness, pressure, and texture. Comprehensive performance assessments and user studies were conducted to validate the actuator's effectiveness, highlighting its diverse feedback capabilities compared to traditional actuators that offer only single feedback modalities.
In safety training simulators, realistic haptic feedback is essential to make people construct accurate situation awareness through experiencing. In this regard, this paper presents a new and innovative system that provides the haptic experience of falling objects on user’s head during an earthquake. Special focus was on the accurate reproduction of impact feedback when various objects fall on the head. To this end, we propose a novel data-driven approach. This approach first collects 3-axis acceleration signals during real collision under several impact velocities. Afterward, 3D acceleration data is abstracted to a 1D acceleration profile using our novel max–min extraction approach. The impact signal for an arbitrary velocity is interpolated using a deep convolutional bidirectional long short-term memory encoder–decoder model. Rendering hardware is also implemented using high performance voice-coil vibrotactile actuator. Numerical and subjective evaluations are carried out to evaluate the performance of the proposed approach.Kindly check and confirm the edit made in the title.I confirm the edit is okay.Please confirm if the author names are presented accurately and in the correct sequence (given name, middle name/initial, family name). Authors Given name: [Joolekha Bibi] Last name: [Joolee], Given name: [Mohammad Shadman] Last name: [Hashem]. Also, kindly confirm the details in the metadata are correct.Yes, the author names are presented accurately and in the correct sequence.