Here, we determined the kinetic parameters of SO2 adsorption on unburned carbons from lignite fly ash and activated carbons based on hard coal dust. The model studies were performed using the linear and non-linear regression method for the following models: pseudo first and second order, intraparticle diffusion, and chemisorption on a heterogeneous surface. The quality of the fitting of a given model to empirical data was assessed based on: R2, R, Δq, SSE, ARE, χ2, HYBRID, MPSD, EABS, and SNE. It was clearly shown that the linear regression more accurately reflects the behaviour of the adsorption system, which is consistent with the first-order kinetic reaction—for activated carbons (SO2 + Ar) or chemisorption on a heterogeneous surface—for unburned carbons (SO2 + Ar and SO2 + Ar + H2O(g) + O2) and activated carbons (SO2 + Ar + H2O(g) + O2). Importantly, usually, each of the approaches (linear/non-linear) indicated a different mechanism of the studied phenomenon. A certain universality of the χ2 and HYBRID functions has been proved, the minimization of which repeatedly led to the lowest SNE values for the indicated models. Fitting data by any of the non-linear equations based on the R or R2 functions only cannot be treated as evidence/prerequisite of the existence of a given adsorption mechanism.
Animal farming produces large volumes of underutilised by-products, such as poultry feathers (PF), often discarded in landfills or incinerated, causing environmental concerns. Transforming such residues into valuable energy carriers aligns with sustainable waste-to-energy (WtE) management. Pyrolysis represents a versatile thermochemical pathway for converting organic wastes into gaseous, liquid, and solid fuels. This study investigates slow pyrolysis of PF, lignite (LG), and their blends at pilot scale using a uniquely designed, patent-pending reactor bridging laboratory research with industrial practice. Experiments were conducted at 20 °C·min−1, temperatures of 500–800 °C, and pressures from 0.1 to 1.0 MPa. PF pyrolysis produced mainly gas (70.1%), suitable for energy recovery, with smaller fractions of char (15.3%) and oil (14.6%). LG yielded predominantly char (59.9%), with lower gas (32.4%) and oil (7.7%) outputs. Co-pyrolysis revealed limited synergistic effects. Rising temperature promoted gas formation, reduced char, and improved its calorific value through carbon enrichment. Elevated pressure enhanced char yield and unexpectedly increased hydrogen content, suggesting complex thermochemical behaviour. The results confirm the scalability of laboratory findings and highlight pyrolysis as a practical WtE pathway for valorising protein-rich residues and low-rank coals, contributing to cleaner, more sustainable energy systems.
This paper provides the analysis of SO2 adsorption on the surface of unburned carbon from lignite fly ash, in the context of the economic use of combustible residues from the combustion process for environmental applications. The research procedure included: porosity and chemical structure characteristics, identification and qualitative evaluation of the ash mineral components, bed porosity and laboratory tests in a fixed bed reactor. It was proved that the adsorbed SO2 can form surface complexes with aluminium oxide and/or with a phenolic group. In the presence of the SO2+Ar, the permanent oxidation of SO2 to SO3 was not confirmed. The addition of H2O(g) does not improve the SO2 binding efficiency, unlike the addition of O2. The physical bonding of SO2 is at a higher level for carbon beds characterized by higher bed porosity, and the increase in chemically adsorbed SO2 occurs due to an increase in acidity and a decrease in the total alkalinity of unburned carbons. Regardless of the gas mixture composition, a positive effect of C-OH and C=O groups on SO2 binding was recorded.
Kinetic parameters of SO2 adsorption on unburned carbons from lignite fly ash and activated carbons based on hard coal dust were determined. The model studies were performed using the linear and non-linear regression method for the following models: pseudo first and second-order, intraparticle diffusion, and chemisorption on a heterogeneous surface. The quality of the fitting of a given model to empirical data was assessed based on: R2, R, Δq, SSE, ARE, χ2, HYBRID, MPSD, EABS, and SNE. It was clearly shown that it is the linear regression that more accurately reflects the behaviour of the adsorption system, which is consistent with the first-order kinetic reaction – for activated carbons (SO2+Ar) or chemisorption on a heterogeneous surface – for unburned carbons (SO2+Ar and SO2+Ar+H2O(g)+O2) and activated carbons (SO2+Ar+H2O(g)+O2). Importantly, usually, each of the approaches (linear/non-linear) indicated a different mechanism of the studied phenomenon. A certain universality of the χ2 and HYBRID functions has been proved, the minimization of which repeatedly led to the lowest SNE values for the indicated models. Fitting data by any of the non-linear equations based on the R or R2 functions only, cannot be treated as evidence/prerequisite of the existence of a given adsorption mechanism.