The study of adsorbent behaviour in laboratory conditions helps to predict the adsorption process in a large industrial scale. In this study, orange and lemon peels-derived activated carbon (OLPAC) was successfully synthesized and activated using phosphoric acid. Characterization was performed on the OLPAC and the material was used for the removal of methyl orange (MO) and methylene (MB) dyes from wastewater. The results of the scanning electron microscope and N₂ adsorption/desorption examination affirmed that the prepared nanocomposite is permeable, which is an advantage for the efficient removal of contaminants. Optimal conditions for the batch removal process were investigated using a one-factor time approach in different conditions of adsorption (Dye concentration 50–200 mg L⁻¹, pH 2–10, adsorbent mass 0.010–0.8, and contact time 5–180 min. The adsorption isotherm equilibrium data were examined by Langmuir, Freundlich, and Temkin, isotherm model. As shown by the correlation coefficient (R²), the data were best described by Langmuir isotherms with maximum adsorption capacities of 33 and 38 mg g^─1 for methyl orange and methylene blue, respectively. Adsorption kinetic data were described using the pseudo-second-order model which suggests that adsorption of MO and MB was by chemisorption mechanism. The method was applicable to real wastewater samples, with satisfactory removal percentages of OM and MB (96 and 98 %). The results of this study show that OLPAC is an inexpensive biosorbent that is successfully utilized in removing methyl orange and methylene blue dyes from wastewater.

This study was aimed at evaluating the adsorption capacity of novel banana peel activated carbon (BPAC) modified with Al₃O₂@chitosan for the removal of cadmium (Cd²⁺) and lead (Pb²⁺) from wastewater. Characterization techniques such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transformed infrared (FTIR) spectroscopy, and Brunauer–Emmett–Teller analysis confirmed the synthesized BPAC@Al₃O₂@chitosan composite material. The univariate approach was used to study the influence of different experimental parameters (such as adsorbent mass, sample pH, and contact time) that affects simultaneous removal of Cd²⁺ and Pb²⁺ ions. Kinetic results showed that adsorption favored the pseudo-second-order kinetic model, whereas the adsorption of Cd²⁺ and Pb²⁺ was best described by the Langmuir model and the adsorption capacity for Cd²⁺ and Pb²⁺ was 46.9 mg g⁻¹ and 57.1 mg g⁻¹, respectively, for monolayer adsorption. It was shown the BPAC composite can be re-used until the third cycle of adsorption–desorption (% Re > 80). Based on the obtained results, it can be concluded that the prepared BPAC@Al₃O₂@chitosan composite material is cost effective, as it is generated from waste banana peels and can be re-used. In addition, the prepared material was able to remove Cd²⁺ and Pb²⁺ up to 99.9%.

South Africa is the home of major global mining operations, and the acid mine drainage (AMD) contribution has been attributed to abandoned mine sites and huge pyrite-bearing tailings from coal and gold mines. Determining the true economic impact and environmental liability of AMD remains difficult. Researchers have been looking into several treatment technologies over the years as a way to reduce its possible environmental impact. Different methods for active and passive remediation have been developed to treat AMD. The aim of this review was to describe the AMD-impacted environments and critically discuss the properties of AMD and current prediction and preventative methods and technologies available to treat AMD. Furthermore, this study critically analysed case studies in South Africa, gaps in AMD research, and the limitations and prospects offered by AMD. The study outlined future technological interventions aimed at a pattern shift in decreasing sludge volumes and operational costs while effectively improving the treatment of AMD. The various treatment technologies have beneficial results, but they also have related technical problems. To reduce the formation of AMD, it is recommended that more preventive methods be investigated. Moreover, there is a current need for integrated AMD treatment technologies that result in a well-rounded overall approach towards sustainability in AMD treatment. As a result, a sustainable AMD treatment strategy has been made possible due to water reuse and recovery valuable resources such sulphuric acid, rare earth elements, and metals. The cost of AMD treatment can be decreased with the use of recovered water and resources, which is essential for developing a sustainable AMD treatment process. More study is required in the future to improve the effectiveness of the various strategies used, with a focus on reducing the formation of secondary pollutants and recovery of valuable resources.

This work reports the preparation and application of Fe₂O₃-SiO₂-PAN nanocomposite for the removal of Cr³⁺, Cu²⁺, Al³⁺, Ba²⁺, Zn²⁺, Ni²⁺, Mn²⁺, Co²⁺, and Ti³⁺ from seawater. X-ray diffraction (XRD), scanning electron microscope/energy dispersive X-ray spectroscopy (SEM/EDS), transmission electron microscope (TEM), and Brunauer-Emmett-Teller (BET) characterized the synthesized composite. The following experimental parameters (Extraction time, adsorbent mass and pH) affecting the removal of major and trace metals were optimized using response surface methodology (RSM). The applicability of the RSM model was verified by performing the confirmation experiment using the optimal condition and the removal efficiency ranged from 90% to 97%, implying that the model was valid. The adsorption kinetic data was described by the pseudo-second order model. The applicability of the materials was tested on real seawater samples (initial concentration ranging from 0.270–203 µg L⁻¹) and the results showed satisfactory percentage efficiency removal that range from 98% to 99.9%. The maximum adsorption capacities were found to be 4.36, 7.20, 2.23, 6.60, 5.06, 2.60, 6.79, 6.65 and 3.00 mg g⁻¹, for Cr³⁺, Cu²⁺, Al³⁺, Ba²⁺, Zn²⁺, Ni²⁺, Mn²⁺, Co²⁺, and Ti⁴⁺, respectively.

In the current study, an activated carbon derived from waste banana peel using H₂SO₄ was applied for the first time in a packed-bed column for methylene blue (MB) dye removal from wastewater. The pore structure and surface of banana peel activated carbon (BPAC) were investigated using X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and Brunauer-Emmett-Teller analysis to discover the mechanism of MB sorption. The produced BPAC by H₂SO₄ activation agent has surface area of 361.86 m²/g and exhibits good thermal stability. The extent of MB breakthrough performance was examined by optimizing flow rate, bed mass, and initial concentration at pH 9. The column’s dynamics revealed a strong dependence of breakthrough curves as a function of process conditions. The breakthrough time (t_b), volume of liters processed (L), and adsorption exhaustion rate all increased as bed mass increased but decreased as flow rate and initial concentration increased. Applying linear regression to the experimental data, Yoon-Nelson and Thomas’ kinetic model was used to extract column characteristic parameters that could be used in process design. Using environmental water, the waste banana peel activated carbon material demonstrated effectiveness in removing MB to below acceptable levels by processing 1.16 L of water with an initial MB concentration of 40 mg/L using 8 g of sorbent. Nitric acid (3M) was able to regenerate the exhausted bed. Moreover, the sorbent was reused four times with no significant capacity loss. It can be concluded that waste banana peel activated carbon medium is an alternative solution to remediate MB-contaminated wastewater.

Due to their antibacterial and antifungal properties, parabens are commonly used as biocides and preservatives in food, cosmetics, and pharmaceuticals. Parabens have been reported to exist in various water matrices at low concentrations, which renders the need for sample preparation before their quantification using analytical techniques. Thus, sample preparation methods such as solid-phase extraction (SPE), rotating-disk sorptive extraction (RDSE), and vortex-assisted dispersive liquid–liquid extraction (VA-DLLE) that are commonly used for parabens extraction and preconcentration have been discussed. As a result of sample preparation methods, analytical techniques now detect parabens at trace levels ranging from µg/L to ng/L. These compounds have been detected in water, air, soil, and human tissues. While the full impact of parabens on human health and ecosystems is still being debated in the scientific community, it is widely recognized that parabens can act as endocrine disruptors. Furthermore, some studies have suggested that parabens may have carcinogenic effects. The presence of parabens in the environment is primarily due to wastewater discharges, which result in widespread contamination and their concentrations increased during the COVID-19 pandemic waves. Neglecting the presence of parabens in water exposes humans to these compounds through contaminated food and drinking water. Although there are reviews that focus on the occurrence, fate, and behavior of parabens in the environment, they frequently overlook critical aspects such as removal methods, policy development, and regulatory frameworks. Addressing this gap, the effective treatment of parabens in water relies on combined approaches that address both cost and operational challenges. Membrane filtration methods, such as nanofiltration (NF) and reverse osmosis (RO), demonstrate high efficacy but are hindered by maintenance and energy costs due to extensive fouling. Innovations in anti-fouling and energy efficiency, coupled with pre-treatment methods like adsorption, help mitigate these costs and enhance scalability. Furthermore, combining adsorption with advanced oxidation processes (AOPs) or biological treatments significantly improves economic and energy efficiency. Integrating systems like O₃/UV with activated carbon, along with byproduct recovery strategies, further advances circular economy goals by minimizing waste and resource use. This review provides a thorough overview of paraben monitoring in wastewater, current treatment techniques, and the regulatory policies that govern their presence. Furthermore, it provides perspectives that are critical for future scientific investigations and shaping policies aimed at mitigating the risks of parabens in drinking water.