Although progress has been made in the ab initio simulation of lattice dynamics in semiconducting crystals, information about the relaxation of nonequilibrium lattice vibrations remains incomplete. This work studies the relaxation times of room-temperature thermal phonons through measurements of thermal conduction along monocrystalline silicon films of thickness down to 74 nm. A repetitive oxidation and etching process ensures that the purity and crystalline quality of the films are comparable with those of bulk samples. Phonon-interface scattering reduces the thermal conductivity by up to 50% at room temperature. The data indicate that the effective mean-free path of the dominant phonons at room temperature is close to 300 nm and thus much longer than the value of 43 nm predicted when phonon dispersion is neglected. This study indicates that a broad variety of lattice transport characteristics for bulk silicon can be obtained through measurements on carefully prepared silicon nanostructures. The present data are also valuable for the thermal simulation of silicon-on-insulator (SOI) transistors.
The electrocaloric effect offers an attractive alternative to the Peltier effect for compact high-efficiency solid-state refrigeration. We report an implementation and experimental characterization of a continuous electrocaloric refrigeration cycle where we use switchable liquid-based thermal interfaces to achieve reliable high-contrast thermal switching between an electrocaloric material and a heat source/sink. The experimentally measured temporal temperature profiles of a cooling load agree well with transient heat transfer modeling results. Our work experimentally validates the feasibility of electrocaloric refrigeration and motivates further applied research on device development.
1 August 1999 in Annual Review of Materials Science
▪ Abstract Heat conduction in novel electronic films influences the performance and reliability of micromachined transistors, lasers, sensors, and actuators. This article reviews experimental and theoretical research on heat conduction in single-crystal semiconducting and superconducting films and superlattices, polycrystalline diamond films, and highly disordered organic and oxide films. The thermal properties of these films can differ dramatically from those of bulk samples owing to the dependence of the material structure and purity on film processing conditions and to the scattering of heat carriers at material boundaries. Predictions and data show that phonon scattering and transmission at boundaries strongly influence the thermal conductivities of single-crystal films and superlattices, although more work is needed to resolve the importance of strain-induced lattice defects. For polycrystalline films, phonon scattering on grain boundaries and associated defects causes the thermal conductivity to be strongly anisotropic and nonhomogeneous. For highly disordered films, preliminary studies have illustrated the influences of impurities on the volumetric heat capacity and, for the case of organic films, molecular orientation on the conductivity anisotropy. More work on disordered films needs to resolve the interplay among atomic-scale disorder, porosity, partial crystallinity, and molecular orientation.
25 March 2010 in Journal of Microelectromechanical Systems
We report the fabrication of dense arrays of super-hydrophilic Cu microposts at solid fractions as high as 58% and aspect ratios as high as four using electrochemical deposition and chemical oxidation techniques. Oxygen surface plasma treatments of photoresist molds and a precise control of the initial electrodeposition current are found to be critical in creating arrays of nearly defect-free Cu posts. The capillary performance of the micropost arrays is characterized using capillary rate of rise experiments and numerical simulations that account for the finite curvatures of liquid menisci. For the given wick morphology, the capillary performance generally decreases with increasing solid fraction and is enhanced by almost an order of magnitude when thin nanostructured copper oxide layers are formed on the post surface. The present work provides a useful starting point to achieve optimal balance between the capillary performance and the effective thermal conductivity of advanced wicks for micro heat pipes.
Heat transport in polymer nanocomposites reinforced with graphite nanoplatelets (GNPs) is studied using high-precision thermal conductivity measurements. The resistance to heat conduction across interfaces between GNPs and the polymer matrix has a strong effect on energy transport in the nanocomposites. The thermal conductivity is observed to increase when GNPs are pretreated with nitric acid to improve interfacial bonding. The improvement in the thermal conductivity, however, is much smaller than the corresponding improvement in mechanical properties. The thermal interface resistance extracted from the present thermal conductivity data is comparable to that obtained from the previously reported data on carbon nanotube suspensions.