The industry of phosphoric acid produces a calcium-rich by-product known as phosphogypsum, which is usually stored in large stacks of millions of tons. Up to now, no commercial application has been widely implemented for its reuse because of the significant presence of potentially toxic contaminants. This work confirmed that up to 96% of the calcium of phosphogypsum could be recycled for CO2 mineral sequestration by a simple two-step process: alkaline dissolution and aqueous carbonation, under ambient pressure and temperature. This CO2 sequestration process based on recycling phosphogypsum wastes would help to mitigate greenhouse gasses emissions. Yet this work goes beyond the validation of the sequestration procedure; it tracks the contaminants, such as trace metals or radionuclides, during the recycling process in the phosphogypsum. Thus, most of the contaminants were transferred from raw phosphogypsum to portlandite, obtained by dissolution of the phosphogypsum in soda, and from portlandite to calcite during aqueous carbonation. These findings provide valuable information for managing phosphogypsum wastes and designing potential technological applications of the by-products of this environmentally-friendly proposal.
The weathering reactions of hydration and carbonation of nanostructured calcium oxide with atmospheric moisture and carbon dioxide have been characterized. This work is the first-to-date combined kinetic and nanostructural research on CaO oriented to two key processes for different systems, i.e. hardening of construction materials and carbon mineral sequestration. The evolution of the precipitated crystalline phases was monitored by X-ray diffraction and thermogravimetry, along with structural characterization by nitrogen physisorption, electron microscopy and small-angle scattering. Complete hydration of the samples was always found prior to the onset of carbon sequestration, which depended on the nanostructure of the samples. Hence, carbonation started after 300 h of weathering for samples with a specific surface area of 40 m2/g, whereas carbonation of the samples with 20 m2/g occurred after 550 h. Full carbonation from atmospheric CO2 (100% efficiency) was obtained in all cases. This combined research was completed by developing an empirical description of the weathering reactions in terms of a two-process Random Pore Model. Finally, this work aimed to determine the role of the nanostructure of samples based on industrial wastes as one of the most important factors for developing efficient carbon sequestration technologies.Peer reviewe
The nanostructure of the main binding phase of the hydrated cements, the calcium silicate hydrates (C–S–H), and their structural changes due to aqueous carbonation have been characterized using TEM, nitrogen physisorption, and SAXS. Synthetic C–S–H has been used for this purpose. Two different morphologies were identified, similar to the high density and low density C–S–H types. When submitting the sample to a CO2 flux, the low density phase was completely carbonated. The carbonation by-products, calcium carbonate, and silica gel were also identified and characterized. The precipitation of the silica gel increased the specific surface area from 95 to 132 m2/g, and its structure, formed by particles of ~5 nm typical radius, was observed by small angle X-ray scattering. In addition, the resistance of the high density C–S–H to carbonation is reported, and the passivating effect of the precipitated calcium carbonate is also discussed. Finally, the results have been compared with carbonation features observed in Portland cement carbonated experimentally at downhole conditions.