Bo Yan

Bo Yan


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 December 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
CWChengkai Wu
Chengkai Wu
Yong ZhangYong Zhang
Yong Zhang
YXYuehang Xu
Yuehang Xu
BYBo Yan
Bo Yan
RXRuimin Xu
Ruimin Xu
In this article, a novel waveguide-to-microstrip transition with a built-in dc/IF return path is proposed, in which a traditional E-plane probe is directly connected to the backshort by a thin metal wire along the axis of the waveguide. The proposed waveguide-to-microstrip transition implements an additional dc/IF return path while realizing mode conversion. Moreover, the presence of the dc/IF return path has little influence on the performance of the original E-plane probe. The operating principle is analyzed by theoretical analysis and full-wave simulation, and the design procedure of the transition is also presented. To implement the proposed dc/IF return path on different substrates, two approaches, including direct integration with planar circuits or with wire bonding technology, are developed. Furthermore, two back-to-back transition prototypes working in the millimeter and submillimeter bands were designed and characterized. The measured results are in excellent agreement with the simulations. Finally, as an application example, a 70-/140-GHz unbalanced frequency doubler adopting this structure for both dc biasing and dc grounding was designed and fabricated. Measured results show that the conversion loss of the fabricated doubler is less than 13 dB in the range from 125 to 145 GHz, and the minimum conversion loss is 11 dB at 140 GHz with 100-mW input power.

30 October 2020 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
HZHuali Zhu
Huali Zhu
Yong ZhangYong Zhang
Yong Zhang
CWChengkai Wu
Chengkai Wu
FXFei Xiao
Fei Xiao
RXRuimin Xu
Ruimin Xu
BYBo Yan
Bo Yan
In this letter, a broadband waveguide-to-coplanar waveguide with ground (CPWG) transition for large-chip-width substrate operating within terahertz frequencies is demonstrated. This transition adopts an integrated dipole antenna with coupling branches and disks topology. This compact transition reduces parasitic effects by wire-bonding and is suitable for direct integration with terahertz monolithic integrated circuits (TMICs), and it enables low energy conversion loss over a wide frequency band. The transition was fabricated on a 970 μm-width substrate by the 50 μm-thick InP technology and designed for WR-4.3 standard waveguide (546 μm width). The measured results show that the bandwidth with 1 dB insertion loss per antenna is as wide as 80 GHz, and the in-band return loss is better than 10 dB.

13 July 2023 in Photonics
Verified
Journal Article
Open access
PDF file
BYBo Yu
Bo Yu
JYJie Yang
Jie Yang
YSYexi Song
Yexi Song
Zhigang WangZhigang Wang
Zhigang Wang
TZTiedi Zhang
Tiedi Zhang
RXRuimin Xu
Ruimin Xu
In terahertz communication systems, amplifiers and other components can induce non-linear distortion in terms of amplitude and phase, resulting in system performance degradation. This paper presents a terahertz metamaterial waveguide to mitigate amplitude and phase distortions in some terahertz systems. A simple method based on free-space analysis is proposed for designing metamaterial waveguides in an enclosed space. The quasi-periodic metamaterial structures, which feature I-shaped resonant patterns, are integrated onto the inner walls of rectangular waveguides. The phase and amplitude of electromagnetic waves within the waveguide can be modulated by varying the dimensions and number of these resonators. Utilizing the effective medium theory and the equivalent circuits, the metamaterial waveguide’s phase and absorption modulation mechanisms are analyzed. Based on the proposed structure, a metamaterial waveguide with I-shaped resonators is designed and fabricated, and its abilities to modulate the phase and absorption of terahertz waves around 0.2 THz are demonstrated.

7 December 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ZCZhihao Chen
Zhihao Chen
XYXinxin Yu
Xinxin Yu
JZJianjun Zhou
Jianjun Zhou
SMShuman Mao
Shuman Mao
YKYuechan Kong
Yuechan Kong
YXYuehang Xu
Yuehang Xu
Mechanisms of trap effects are crucial to improving diamond-based transistor electrical performance. Here, the trap effects in hydrogen-terminated diamond metal-oxide-semiconductor field-effect transistors (HD MOSFETs) are investigated by separating the effects of gate dielectric bulk alumina (BA) and diamond substrate (DS) for the first time. First, the location of traps and their impact on the dynamic drain current are characterized by pulsed I,-V characterization. The dynamic drain current is degraded by traps in both BA and DS. Furthermore, the quiescent-bias-point-dependent trapping effects are studied by different quiescent bias points to reveal the response intensity of these two kinds of traps. Second, to further respectively characterize the effects of traps in the BA and the DS on HD MOSFETs, the threshold voltage ( $V_{th}$ ) instability was characterized under negative gate bias stress (NGBS) conditions. Strong gate biases ranging from -4 to -8 V are selected to activate traps in DS. An extraordinary nonmonotonic change in $V_{th}$ is found under the -8 V NGBS condition. Moreover, the corresponding variation in $V_{th}$ is, unexpectedly, smaller than -4 and -6 V NGBS conditions. These phenomena indicate that the detrapping effect in the DS become dominant with increasing stress duration in the variation in $V_{th}$ under an NGBS of -8 V. Finally, based on these results, an improved kinetic model is proposed to separately describe the effects of traps in the BA and the DS. These results are useful for improving the performance of HD MOSFETs.

2 January 2023 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
ZDZhang Dang
Zhang Dang
Yong ZhangYong Zhang
Yong Zhang
HZHua-Li Zhu
Hua-Li Zhu
BYBo Yan
Bo Yan
RXRui-Min Xu
Rui-Min Xu
A 3-dB waveguide-to-microstrip isolated power divider with a full bandwidth of rectangular TE $_{10}$ mode has been presented in this study. A TaN film resistor is designed between the tips of the dual microstrip probes suspended in the waveguide to improve isolation. The measured results show above 19.6-dB minimum isolation in full Ka-band (26.5–40 GHz). The return loss is higher than 15.8 dB at all ports, with an average loss of 0.35 dB.

20 January 2021 in Electronics
Verified
Journal Article
Open access
PDF file
BZBo Zhang
Bo Zhang
Yong ZhangYong Zhang
Yong Zhang
LPLiucheng Pan
Liucheng Pan
YLYu Li
Yu Li
JCJianhang Cui
Jianhang Cui
BYBo Yan
Bo Yan
In this paper, a 560 GHz terahertz sub-harmonic mixer using a new half-global design method is reported. This method combines the advantages of the subdivision design method and the global design method, and greatly enhances the abilities of the optimization of matching variables while retaining the portability of the unit circuit. When the local oscillator (LO) frequency was fixed with 3 mW power at 280 GHz, average up-conversion double sideband (DSB) conversion loss of 8 dB with intermediate frequency (IF) power of −5 dBm was achieved.